Replaces

GMC Envoy Envoy XL Driver or Passenger Side Tail Light Circuit Board

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

This Tail light circuit connector board is just what you need to get your Tail light working again!

Specifications:

  • LH (Driver Side) or RH (Passenger Side)
  • High quality item that is built to strict quality control standards
  • Direct bolt on ~ Easy to install
  • Replaces burnt and malfunctioning circuit board
  • Allows for just replacement of defective part instead of entire Tail light

This Tail light circuit connector board makes a great replacement and has good cost savings over a dealer circuit board.

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Taillight (0:40)
    • Open the lift gate
    • Remove the two Phillips screws from the taillight bracket
    • Disconnect the headlight wiring harness
  2. step : Removing the Circuit Board and Servicing the Bulbs (1:04)
    • Remove the three Phillips screws from the circuit board
    • Pull the circuit board out
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Push the bulb onto the socket
    • Push the circuit board into the light
    • Insert and tighten the three Phillips screws into the circuit board
  3. step : Installing the New Taillight (2:15)
    • Push in the tabs on the plate on the old taillight and remove it
    • Connect the plate to the new taillight
    • Reconnect the wiring harness to the taillight
    • Line up the bolt holes on the taillight bracket to the bolt holes on the vehicle
    • Replace the two Phillips screws into the taillight bracket

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Shop 1A Auto for all your parts needs!
1A always has exactly what I need, for a great price, they stand by their products and will replace if something goes wrong. THEY ARE THE BEST in online parts, and if you dont know how to install them the videos are a life saver!
November 3, 2017
top quality
The parts come fast and was very easy to install the company was helpful in choosing the right thing
September 9, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2009GMC Envoy GMC Envoy Driver or Passenger Side Tail Light Circuit Board
2002-2006GMC Envoy XL GMC Envoy XL Driver or Passenger Side Tail Light Circuit Board
Part 1ALTL00313
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.