Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement fuel filler neck is just what you need to get your vehicle in good working order again!


  • Fits between outer 1/4 panel and filler hose
  • Configuration:
    • (1) Main filler tube
    • (1) Vent Tube
  • Replaces dealer part number: 22688930
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident
  • Fits 2 & 4 Door models

Note: If there is any question about this filler neck fitting your vehicle, please ask your local dealer if the above OE number will fit your application.

This fuel filler neck is a great replacement and has good cost savings over a gas tank filler neck from the dealer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Fuel Filler Neck (1:09)
    • Remove the gas cap
    • Remove the two T20 Torx screws from the gas neck
    • Remove the clips from the filler neck with a flat blade screwdriver
    • Remove the 10mm bolt from the bracket around the filler neck
    • Loosen the clamp on the rubber hose with a flat blade screwdriver
    • Grasp the rubber hose from the filler neck with pliers
    • Twist off the rubber hose
    • Remove the fuel tank funnel
    • Pull the fuel filler out through the car
  2. step : Installing the New Fuel Filler Neck (5:11)
    • Insert the filler neck into its same route between the frame and body
    • Place some penetrating oil on the end of the filler neck
    • Insert the rubber hose into the filler neck
    • Tighten the 10mm bolt preliminarily to the bracket around the filler neck
    • Insert the fuel tank funnel after cleaning it
    • Place the neck into the funnel and insert the clips
    • Insert and tighten the T20 Torx screws to the gas neck
    • Tighten the 10mm bolt to the bracket around the filler neck
    • Tighten the rubber hose clamp with a flat blade screwdriver

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Works great
Good part. Solid material. Easy install. Just needed to replace the stock part after 15 years
June 13, 2016
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2004Oldsmobile Alero Olds Alero Fuel Tank Filler Neck
1999-2005Pontiac Grand Am Pontiac Grand Am Fuel Tank Filler Neck
Part #: 1AFMX00064

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:00 min)