Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Ford Escort & Mercury Tracer fuel tank filler neck is just what you need to get your vehicle in good working order again!

Specifications

  • Fits between outer 1/4 panel and gas tank
  • Configuration:
    • (1) Main filler tube
    • (1) Vent Tube
  • Replaces dealer part numbers: XS4Z 9034 BA, XS4Z9034BA
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident
  • Will fit all Escort and Tracer models as listed:

This Ford Escort & Mercury Tracer fuel filler neck is a great replacement and has good cost savings over a gas tank filler neck from the dealer.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Gas Cap (1:01)
    • Open the fuel door
    • Twist off the gas cap
    • Remove the two 8mm bolts from the filler neck
    • Pull off the gas cap collar
  2. step : Removing the Filler Neck Panel (1:31)
    • Remove the two 8mm bolts from the filler neck panel
    • Remove the plastic rivet from the filler neck panel
    • Pull off the filler neck panel
  3. step : Removing the Filler Neck (2:35)
    • Apply rust penetrant to the filler neck bolts
    • Remove the 10mm bolt from the filler neck
    • Apply rust penetrant to the filler neck hose clamps
    • Loosen the hose clamps, using vise grip pliers or a hammer and screwdriver, if necessary
    • Pry the hoses off the filler neck
    • Pull the filler neck down and out
  4. step : Installing the Filler Neck (4:58)
    • Lift the filler neck into place
    • Push the hoses onto the filler neck
    • Tighten the filler neck hose clamps
    • Remove the speed nuts from the old filler neck with pliers
    • Push the speed nuts into the new filler neck
  5. step : Installing the Gas Cap (6:45)
    • Push in the gas cap collar
    • Install the two 8mm bolts into the filler neck
  6. step : Installing the Filler Neck Panel (7:09)
    • Insert the 10mm bolt into the filler neck
    • Alternatively, hold the filler neck in place with wire ties
    • Lift the filler neck panel into place
    • Insert the two 8mm bolts into the filler neck panel
    • Insert the plastic rivet into the filler neck panel
    • Twist on the gas cap
    • Close the fuel door

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Gary Z
Exact fit! Sent to my house the next day! If only all my vendors serviced me this good! Thank you 1A!
June 22, 2017
Perfect fit, ez install.
Thank you for your helpful videos. The instruction were clear and concise. This made the job so much easier.
November 13, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2002Ford Escort Ford Escort Fuel Tank Filler Neck
2003Ford ZX2 Ford ZX2 Fuel Tank Filler Neck
1998-1999Mercury Tracer Mercury Tracer Fuel Tank Filler Neck
Part #: 1AFMX00050


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:22 min)