This replacement fuel filler neck is just what you need to get your vehicle in good working order again!


  • Upper Fuel Tank Filler Neck with Hoses
  • Configuration:
    • (1) - Main filler tube - UPPER
    • (1) - Vent tube - UPPER
    • (2) - Rubber connecting hoses
    • (2) - Hose clamps
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident
  • Fits 4 door models with Plastic Fuel Tank only

Note: If there is any question about this filler neck fitting your vehicle, please ask your local dealer if the above OE numbers will fit your application.

This fuel filler neck is a great replacement and has good cost savings over a gas tank filler neck from the dealer.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
does this include everything for connecting to tank?
rick s on Sep 27, 2015
BEST ANSWER: There is a hose that comes from the tank that the lower end of the fill tube fits into and a ring clamp to tighten the hose onto the pipe . Tip: grease the tube and or the hose before trying to insert the pipe . To answer your question ; everything but the rubber hose and hose clamp is included .

Vehicle Fit

  • 1997-2000 Chevy Blazer S10 4 Door Upper Fuel Tank Filler Neck with Hoses
  • 1998-2000 GMC Envoy Upper Fuel Tank Filler Neck with Hoses
  • 1997-2000 GMC Jimmy S-15 4 Door Upper Fuel Tank Filler Neck with Hoses
  • 1997-2000 Olds Bravada Upper Fuel Tank Filler Neck with Hoses

This part replaces:

  • OE # 15725300
  • OE # 15061624
  • OE # 15023466
  • Dorman 577-948
Part #: 1AFMX00151