Replaces

Fuel Pump & Sending Unit Module TRQ FPA86502 - 1AFPU01380

Specifications:

  • Mounts in fuel tank
  • Complete module assembly
  • Replaces dealer part number: 19180107
  • Assembly includes the following parts:
    • Electric Fuel Pump
    • Plastic module
    • Fuel sending unit
    • Float
    • Strainer
  • Number of outlets: 2
  • Rheostat range: (40-250 Ohms)
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

This fuel pump includes a new electrical connector harness. You will need to remove your existing electrical connector and install the new connector provided in order to install your new fuel pump (instructions are included with the pump).

This fuel pump is not a universal fit item. Because your vehicle’s original connector is prone to failure due to corrosion, cracking, loose pin housings, and wire crimp issues, the OE manufacturer has changed the shape of the connector, requiring the install of a new electrical connector during fuel pump service.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Old Fuel Pump Wiring Connector (0:15)
    • Disconnect the fuel pump wiring harness
    • Cut off the old connector with wire cutters
    • Strip a quarter of an inch of insulation off each wire
  2. step : Installing the New Fuel Pump Wiring Connector (1:26)
    • Put the blue wire splices onto the black and grey wires
    • Put the red splices onto the purple wire and the black wire with a white stripe
    • Crimp the splices onto the wires
    • Connect the wires of the new connector to the corresponding splice
    • Crimp the splices onto the new connector's wires
    • Wrap the splices with electrical tape
    • Remove the post to make way for the harness with pliers, if necessary
    • Connect the fuel pump harness

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Electrical Tape

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Wire End Cutters

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-1999 Buick Century V6 3.1L Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-1999 Buick Regal V6 3.8L (8th Vin Digit K) Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-1999 Olds Intrigue V6 3.8L Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1999-2000 Olds Intrigue V6 3.5L Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-2000 Pontiac Grand Prix V6 3.1L Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-2000 Pontiac Grand Prix V6 3.8L (8th Vin Digit K) Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ

This part replaces:

  • Spectra Premium Industries TNKSP3537M
  • Airtex E3537M
  • OE # 19180107
  • TRQ FPA86502
Part #: 1AFPU01380

Out of Stock

TRQ
Brand #: FPA86502

How-to Video:

(04:01 min)