Replaces

Fuel Pump & Sending Unit Module TRQ FPA86500 - 1AFPU01378

Specifications:

  • Mounts in fuel tank
  • Complete module assembly
  • Replaces dealer part number: 19180115
  • Assembly includes the following parts:
    • Electric Fuel Pump
    • Plastic module
    • Fuel sending unit
    • Float
    • Strainer
    • Pressure Sensor
  • Number of outlets: 3
  • Rheostat range: (40-250 Ohms)
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

This fuel pump includes a new electrical connector harness. You will need to remove your existing electrical connector and install the new connector provided in order to install your new fuel pump (instructions are included with the pump).

This fuel pump is not a universal fit item. Because your vehicle’s original connector is prone to failure due to corrosion, cracking, loose pin housings, and wire crimp issues, the OE manufacturer has changed the shape of the connector, requiring the install of a new electrical connector during fuel pump service.

Part Details

  • Includes: (1) Wire Stripper / Crimper Tool

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Old Fuel Pump Wiring Connector (0:15)
    • Disconnect the fuel pump wiring harness
    • Cut off the old connector with wire cutters
    • Strip a quarter of an inch of insulation off each wire
  2. step : Installing the New Fuel Pump Wiring Connector (1:26)
    • Put the blue wire splices onto the black and grey wires
    • Put the red splices onto the purple wire and the black wire with a white stripe
    • Crimp the splices onto the wires
    • Connect the wires of the new connector to the corresponding splice
    • Crimp the splices onto the new connector's wires
    • Wrap the splices with electrical tape
    • Remove the post to make way for the harness with pliers, if necessary
    • Connect the fuel pump harness

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Electrical Tape

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Wire End Cutters

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
New Pump is in an works great
I purchased this item because my gas gauge had erratic readings. After installing the new pump gas gauge is working properly and I can depend on the reading it gives. Glad I replaced the fuel pump and I now have properly working fuel gauge.
June 9, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2005 Buick LeSabre V6 3.8L (8th Vin Digit K) Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-2005 Buick Park Avenue V6 3.8L (8th Vin Digit K) (excluding Supercharged Models) Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 2000-2005 Cadillac Deville Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-2003 Cadillac SLS Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-2003 Cadillac STS Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-2004 Cadillac Seville Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 1998-2003 Olds Aurora Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 2000-2005 Pontiac Bonneville V6 3.8L (8th Vin Digit K) (excluding Supercharged Models) Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 2000 Pontiac Bonneville V6 3.8L Supercharged Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ
  • 2004-2005 Pontiac Bonneville V8 4.6L Fuel Pump & Sending Unit Module with (1) Wire Stripper / Crimper Tool TRQ

This part replaces:

  • OE # 19180115
  • Spectra Premium Industries TNKSP3518M
  • Airtex E3518M
  • TRQ FPA86500
Part #: 1AFPU01378

Out of Stock

TRQ
Brand #: FPA86500

How-to Video:

(04:01 min)