This replacement electric fuel pump is just what you need to get your car in good working order again!

Specifications:

  • Mounts in fuel tank
  • Replaces dealer part numbers: 25344956, 19180114
  • Outlets: 3
  • Plug Connections: 2
  • Assembly includes the following parts:
    • Electric Fuel Pump
    • Plastic module
    • Fuel sending unit
      • Rheostat Range: 40-250 Ohms
    • Float
    • Strainer
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards
  • Only fits models with the following GM engines as listed in descriptions:
    • V6 3.1L
    • V6 3.4L
    • V6 3.5L
    • V6 3.8L (Non Super Charged)

This electric fuel pump module assembly with sending unit is a great replacement and has good cost savings over a dealer unit.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

This fuel pump includes a new electrical connector harness. You will need to remove your existing electrical connector and install the new connector provided in order to install your new fuel pump (instructions are included with the pump).

This fuel pump is not a universal fit item. Because your vehicle’s original connector is prone to failure due to corrosion, cracking, loose pin housings, and wire crimp issues, the OE manufacturer has changed the shape of the connector, requiring the install of a new electrical connector during fuel pump service.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Fuel Pump Relay (0:45)
    • Turn the vehicle on and run the engine
    • Open the fuse box door
    • Locate and remove the fuel pump relay with pliers
    • Insert the fuel pump relay into the fuse box
    • Close the fuse box door
  2. step : Removing the Fuel Pump Panel (1:05)
    • Pull the back seats down
    • Pull the trim and carpet apart
    • Remove the 10mm bolts from the fuel pump panel
    • Pry up on the panel with a flat blade screwdriver
  3. step : Removing the Fuel Pump (2:07)
    • Pull up on the pin from the sending unit
    • Disconnect the sending unit wiring harnesses
    • Push the outside fuel lines in, push down on the tab, and pull them free
    • Push the tab on the center fuel line and pull it free
    • Hammer the locking ring with a flat blade screwdriver to turn the locking ring
    • Lift the locking ring up and off
    • Pull the fuel pump up
    • Let the pump drain
    • Lift the fuel pump up and out
  4. step : Preparing the Fuel Pump (3:55)
    • Apply the level sensor to the new fuel pump
    • Remove the fuel line clips from the old sensing unit
    • Remove the packing cap from the new fuel pump
    • Insert the fuel line clips onto the new fuel pump
    • Cut off the old sending unit wiring harness with the blue strip with wire cutters
    • Strip a quarter of an inch off the old wires with wire cutters
    • Apply the blue connectors on the grey and black wire
    • Apply the red connectors to the purple and black and white wire
    • Connect the new sending unit harness to the connectors
  5. step : Installing the Fuel Pump (7:39)
    • Place the fuel pump and sending unit into the fuel tank
    • Fit the locking ring into place and line up the slots with the tabs without pinching the harnesses
    • Twist the ring clockwise with a flat blade screwdriver and hammer
    • Remove one of the posts from the locking ring with a pair of pliers
    • Connect the pin to the sending unit
    • Connect the wiring harnesses to the fuel pump
    • Connect the fuel lines
  6. step : Reinstalling the Fuel Pump Panel (10:20)
    • Replace the panel
    • Insert and tighten the 10mm bolts
    • Cover the panel with the trim and carpet
    • Pull the back seats up

Tools needed for replacement:

    General Tools

  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Wire End Cutters
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.5 / 5.0
25 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
21
1
0
0
3
As expected
Would recommend it to anyone was simple to install
June 15, 2018
Purchased
4 weeks ago
Fuel pump
Great replacement part. Everything fit great and is still working great.
June 11, 2018
Purchased
6 months ago
FUEL PUMP
EXACTLY WHAT NEEDED GREAT HELPFUL VIDEO AND VERY FAST SHIPPING THANK YOU I WILL ORDER FROM YOU ALL AGAIN
May 3, 2018
Purchased
2 months ago
Buick Regal Owner....
I was very impressed with 1A-Auto for great service and true replacement parts. I have purchased many parts and will continue to use 1A-Auto for years to come. Thomas Browning
April 27, 2018
Purchased
2 months ago
Fuel pump & Sending Unit Module
Received part early and with no hassels. Watched video on how to install and had no problem installing. Product seems tp be perforninh as it should and is way cheaper yhan a dealer.I would recommend this product. The only thing I did different than what was shown is I vacuumed around pump before taking it out.
March 16, 2018
Purchased
4 months ago
Fuel Pump & Sending Unit
A perfect fit and 1A's how to video made it super easy. They have some of the best prices around. Their customer service is great as well.
February 23, 2018
Purchased
10 months ago
Quality products
Good quality at great price. I have done many order with a1 auto and never got wrong or bad parts. Keep up the good work
February 10, 2018
Purchased
4 months ago
I have 0 complaints
This is the new site where I purchase any/ everything I need for my car... Parts are 100% garenteed, and they had it at my doorstep in 2 Days
December 11, 2017
Purchased
7 months ago
Replacing sending unit on a 2004 Monte Carlo
Everything went great ,same as in the video. Saved $540.00 on labor that the garage wanted to do it. Thanks. J. Warburton.
November 27, 2017
Purchased
7 months ago
Works great much cheaper than part elsewhere
Replacement fuel pump works great, was easy to install other than having break off one of the metal posts on the metal ring that holds the fuel pump in place. I did get it done but was a struggle. The video perfectly shows every step for how to do the job.
November 21, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
how to disconect the fuel ines??
todd g on Nov 4, 2016
BEST ANSWER: Need a disconnect tool, you should be able to rent one at the local parts store.

Vehicle Fit

  • 2000-2005 Buick Century Fuel Pump & Sending Unit Module V6 3.1L
  • 2000-2004 Buick Regal Fuel Pump & Sending Unit Module V6 3.8L (excluding Supercharged Models)
  • 2000-2005 Chevy Impala Fuel Pump & Sending Unit Module V6 3.4L
  • 2000-2003 Chevy Impala Fuel Pump & Sending Unit Module V6 3.8L
  • 2004-2005 Chevy Impala Fuel Pump & Sending Unit Module V6 3.8L (excluding Supercharged Models)
  • 2000-2003 Chevy Monte Carlo Fuel Pump & Sending Unit Module V6 3.8L
  • 2000-2005 Chevy Monte Carlo Fuel Pump & Sending Unit Module V6 3.4L
  • 2004-2005 Chevy Monte Carlo Fuel Pump & Sending Unit Module V6 3.8L (excluding Supercharged Models)
  • 2001-2002 Olds Intrigue Fuel Pump & Sending Unit Module V6 3.5L
  • 2001-2003 Pontiac Grand Prix Fuel Pump & Sending Unit Module V6 3.1L
  • 2001-2003 Pontiac Grand Prix Fuel Pump & Sending Unit Module V6 3.8L (excluding Supercharged Models)

This part replaces:

  • OE # 25331861
  • OE # 25344933
  • OE # 25345021
  • Hollander 323-01314
  • Spectra Premium Industries TNKSP6177M
Part #: 1AFPU01117

How-to Video:

(11:21 min)