Replaces

Fuel Pump & Sending Unit Module TRQ FPA61983 - 1AFPU01086

Specifications:

  • Mounts in fuel tank
  • Complete module assembly
  • Electric fuel pump already mounted as shown
  • Includes items shown
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards

 

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Depressurizing the Fuel Lines (0:50)
    • Remove the fuse panel cover
    • Remove the fuel pump relay, location: 50B
    • Start the vehicle and let it run until it dies
    • Crank the vehicle a few more times to clear the fuel system
  2. step : Disconnecting the Battery (1:39)
    • Remove the 8mm nut on the negative batter terminal
    • Lay the terminal off to the side
  3. step : Removing the Skid Plate (2:00)
    • Raise the vehicle on a jack and jack stands
    • Remove the 13mm bolt at the front of the skid plate
    • Remove the 13mm bolt on the frame rail
    • Remove the 13mm bolt on the bed support
    • Have a helper hold the skid plate
    • Remove the 13mm bolt on the rear of the skid plate on the frame
    • Lower the skid plate
  4. step : Disconnecting the Gas Tank (3:48)
    • Support the gas tank with a screw jack or floor jack to support the weight
    • Remove two 13mm bolts from one side of the tank straps
    • Carefully lower the tank to access the wiring harness
    • Disconnect the fuel pump connectors
    • Pry out the yellow clips and clear clips
    • Push in on the red, green, and white clips
    • Disconnect the connectors from the top of the tank
  5. step : Removing the Gas Tank (6:25)
    • Disconnect the filler neck hose clamps with a flat blade screwdriver
    • Remove the rubber hoses slowly with a pair of pliers
    • Raise the tank with the floor jack
    • Pull the straps down and sideways to remove them
    • Have a helper to lower the tank
    • Slide the tank toward the axle and out of the vehicle
  6. step : Removing the Fuel Pump Sending Unit (8:24)
    • Gently tap the lock ring with a small hammer
    • Remove the lock ring the rest of the way
    • Remove the fuel pump sending unit
  7. step : Installing the Fuel Pump Sending Unit (9:10)
    • Insert the sending unit into the fuel tank
    • Make sure the gasket is sitting properly
    • Insert the lock ring while holding the pump down
    • Tighten the lock ring
  8. step : Installing the Gas Tank (10:03)
    • Insert the gas tank with a helper, front end over the crossmember first
    • Raise and support the gas tank
    • Reinstall the filler line hoses
    • Tighten the filler line hose clamps
  9. step : Reconnecting the Gas Tank (11:00)
    • Reconnect the fuel tank hoses
    • Reinstall the clips into their connectors
    • Connect the fuel pump wiring harness
    • Insert the gas tank straps up into place and rotate them
    • Tighten the 13mm bolts to the straps
    • Lower the jacks
  10. step : Installing the Skid Plate (12:40)
    • Have a helper support the skid plate
    • Tighten the 13mm bolt on the rear of the skid plate on the frame
    • Tighten the 13mm bolt on the frame rail
    • Tighten the 13mm bolt at the front of the skid plate
    • Tighten the 13mm bolt on the bed support
  11. step : Reconnecting the Battery (13:23)
    • Tighten the negative terminal with a 10mm socket
  12. step : Priming the Fuel System (13:32)
    • Insert the fuel pump relay into its socket
    • Reinstall the fuse panel cover
    • Turn the key on and wait for the fuel pump to shut off
    • Repeat the process three times
    • Crank the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Safety Glasses

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 13mm Socket

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
2003 Ford Ranger Fuel Pump
Ordered and had it 2 days later. Was half the price of anywhere in town. Installed and worked great. Will look at 1aauto for other needs in the future.
May 14, 2018
Purchased
2 months ago
Fuel pump
i have had good luck with all the parts I gotten from you guys thanks and when I need more parts I will call you
April 13, 2018
Purchased
3 months ago
Perfect fit
Great service ,Great Price ,Excellent shipping no problem,exact fit sales personal very knowledgeable
January 23, 2018
Purchased
6 months ago
Fuel pump
Installed it as soon as I got it fits like a glove. Thanks 1aauto for fast delivery and accurate part.
January 20, 2018
Purchased
6 months ago
Great product
Delivered earlier than estimated with no defects. I will shop here again!! The price was right! Thank you!
December 2, 2017
Purchased
8 months ago
perfect easy replacement
Yes i would reccomend this replacement fuel pump for anyone with a Ranger needing to fix a fuel flow problem. the price was good and a direct fit mage it easy to change in a day,
August 23, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001 Ford Ranger Regular Cab with 6 Foot Bed Fuel Pump & Sending Unit Module V6 4.0L TRQ
  • 2001 Ford Ranger Super Cab (Extended Cab) Fuel Pump & Sending Unit Module L4 2.3L TRQ
  • 2001 Ford Ranger Regular Cab with 6 Foot Bed Fuel Pump & Sending Unit Module V6 3.0L (excluding Flex Fuel) TRQ
  • 2001 Ford Ranger Super Cab (Extended Cab) Fuel Pump & Sending Unit Module V6 4.0L TRQ
  • 2001 Ford Ranger Super Cab (Extended Cab) Fuel Pump & Sending Unit Module V6 3.0L (excluding Flex Fuel) TRQ
  • 2001 Ford Ranger Regular Cab with 6 Foot Bed Fuel Pump & Sending Unit Module L4 2.3L TRQ
  • 2002-2003 Ford Ranger Super Cab (Extended Cab) Fuel Pump & Sending Unit Module (excluding Flex Fuel) TRQ
  • 2002-2003 Ford Ranger Regular Cab with 6 Foot Bed Fuel Pump & Sending Unit Module (excluding Flex Fuel) TRQ
  • 2001-2002 Mazda B2300 Truck Fuel Pump & Sending Unit Module TRQ
  • 2003 Mazda B2300 Truck Fuel Pump & Sending Unit Module (Built Before 8/04/04 Production Date) TRQ
  • 2001-2002 Mazda B3000 Truck Fuel Pump & Sending Unit Module (excluding Flex Fuel) TRQ
  • 2003 Mazda B3000 Truck Fuel Pump & Sending Unit Module (excluding Flex Fuel) (Built Before 8/04/04 Production Date) TRQ
  • 2001-2002 Mazda B4000 Truck Fuel Pump & Sending Unit Module TRQ
  • 2003 Mazda B4000 Truck Fuel Pump & Sending Unit Module (Built Before 8/04/04 Production Date) TRQ

This part replaces:

  • Hollander 323-01768
  • OE # 3L5Z9H307FC, 1F2013350C
  • Spectra Premium Industries SP2293M
  • TRQ FPA61983
Part #: 1AFPU01086

TRQ
Brand #: FPA61983

How-to Video:

(14:24 min)