Replaces

Fuel Pump & Sending Unit Module TRQ FPA84948 - 1AFPU00295

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement electric fuel pump module assembly is just what you need to get your vehicle in good working order again!

Specifications:

  • Mounts in fuel tank
  • Complete module assembly
  • Replaces dealer part number: 19153713, 19179477
  • Assembly includes the following parts:
    • Electric Fuel Pump
    • Plastic module
    • Fuel sending unit
    • Float
    • Strainer
  • Number of outlets: 2
  • Rheostat range: (40-250 Ohms)
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards
  • Correct for vehicles without Robust Fuel System (RPO code K53)
  • Does not fit applications with harness code TDB

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

This electric fuel pump module assembly with sending unit is a great replacement and has good cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

This fuel pump includes a new electrical connector harness. You will need to remove your existing electrical connector and install the new connector provided in order to install your new fuel pump (instructions are included with the pump).

This fuel pump is not a universal fit item. Because your vehicle’s original connector is prone to failure due to corrosion, cracking, loose pin housings, and wire crimp issues, the OE manufacturer has changed the shape of the connector, requiring the install of a new electrical connector during fuel pump service.

Rigorously Tested

Meets or exceeds all SAE fuel pump performance and durability standards

Highest Quality Material

Consistent high quality plastic molding media.

High-carbon motor commutator and brushes for longer pump life

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application

Item Condition: New

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Fuel Hoses (0:41)
    • Lift and secure the vehicle
    • Loosen the two hose clamps with an 8mm socket and ratchet
    • Pull the hoses free, using a pry bar if necessary
  2. step : Removing the Fuel Tank Straps (1:41)
    • Support the fuel tank with a jack stand
    • Remove the 15mm bolt from each fuel tank strap
    • Pull off the fuel tank straps
  3. step : Removing the Fuel Tank (2:39)
    • Have an assistant hold one end of the tank
    • Lower the jack
    • Pull the top hose free from its bracket
    • Disconnect the rear hose from the fuel tank
    • Disconnect the rear hose from its brackets
    • Disconnect the fuel pump wiring harnesses
    • Disconnect the fuel pump hoses with pliers
    • Pull the front hoses out of the gas tank
    • Pull the fuel pump hoses out of their brackets
    • Tape over the holes in the fuel tank
    • Lower the fuel tank with the help of an assistant
    • Disconnect the top hose from the fuel tank
    • If the gas tank is too heavy, pour the gas into an appropriate container
  4. step : Removing the Fuel Pump (5:25)
    • Loosen the fuel pump ring with a hammer and screwdriver
    • Pull of the fuel pump ring
    • Pull the fuel pump out of the tank
    • Pour any gas inside the pump into the tank
  5. step : Installing the New Fuel Pump (6:12)
    • Push the float arm onto the new fuel pump
    • Slide the fuel pump hose clips off the old fuel pump with a flat blade screwdriver
    • Slide the fuel pump hose clips onto the new fuel pump with a flat blade screwdriver
    • Put the new fuel pump into the tank
    • Put the fuel pump ring into place
    • Lock the ring into place with a hammer and screwdriver
  6. step : Reinstalling the Fuel Tank (7:14)
    • Lift the fuel tank into place, front first, with the help of an assistant
    • Reconnect the front fuel tank hose
    • Clip the front hose into its bracket
    • Push the rear of the tank up partially
    • Support the tank with the jack
    • Connect the fuel pump hoses
    • Reconnect the fuel pump wiring harnesses
    • Clip the fuel pump hoses into their brackets
    • Connect the rear hose
    • Push the rear hose into its brackets
    • Raise the tank the rest of the way up with the jack
    • Remove the tape from the tank
    • Reconnect the two upper hoses
    • Tighten the two hose clamps with an 8mm socket and ratchet
  7. step : Installing the New Fuel Tank Straps (11:05)
    • Hang the new fuel tank straps in their brackets
    • Insert the 15mm bolt into each fuel tank strap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Assistant
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Electrical Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 15mm Socket

4.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
1
This part was just what I needed not only did I replaced the broke part but that light on my dash is off will use them again for parts in the future and the price was better than anyones else
Great part did the job and the price was better than anyone else it came in less than a week and fixed that light on my dash will buy from them in the future for the best prices on vehicle parts
February 6, 2017
good fuel pump plug and play oem
I highly recommend this company good product, good customer service, knowledgeable staff, excellent warranty and if you have a problem there is always someone to help you.
March 19, 2017
who built it
would Not work, took it to garage they ran test on it. We found out the pos was not wired right
August 21, 2017
I received the pump and it was in good shape, all the parts were in the box and the box came in good shape too, I installed the pump and I hope it lasts for years to come, thank you for selling a product that is 4 times cheaper than Pronto Napa, CARQUEST and others. I think this pump is the second one I have bought from you. Toms Service.
January 24, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this feul pump fit the 2000 chevy sub 2500 also?
Ron E October 5, 2017
This is specific to the 2002 and 2003 models. Please check our other listings for the appropriate replacement.
Alex P October 6, 2017
Year Make Model Description
2002-2003Cadillac Escalade EXT Cadillac Escalade EXT Fuel Pump & Sending Unit Module (excluding Harness Code TDB) TRQ
2002-2003Chevy Avalanche 1500 Chevy Avalanche 1500 Fuel Pump & Sending Unit Module (excluding Harness Code TDB) TRQ
2002-2003Chevy Suburban 1500 Chevy Suburban 1500 Fuel Pump & Sending Unit Module (excluding Harness Code TDB) TRQ
2002-2003Chevy Suburban 2500 Chevy Suburban 2500 Fuel Pump & Sending Unit Module (excluding Harness Code TDB) TRQ
2003GMC Yukon GMC Yukon Fuel Pump & Sending Unit Module (excluding Harness Code TDB) TRQ
Part #: 1AFPU00295


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: FPA84948

How-to Video:

(11:57 min)