Specifications:

  • (6) - Brand New Fuel Injectors
  • Replaces dealer part number: 4591986AA
  • Built to strict quality control standards
  • Direct replacements
  • 100% factory tested
  • Correct for models with the following engines per application:
    • V6 2.7L
    • V6 3.5L
    • V6 4.0L

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Release the pressure from the fuel system (0:48)
    • With the engine running, remove the fuel pump relay from the fuse block.
    • This will stop the engine and release the pressure in the fuel system.
  2. step : Remove the upper intake manifold. (0:55)
    • Use a 10 mm socket and ratchet to remove the upper intake manifold.
    • Disconnect the air pressure sensor.
    • Remove the 8 ten mm bolts.
  3. step : Remove the air box (1:40)
    • Loosen the clamp and the bolt securing the air box.
    • Disconnect the hose and wiring harness.
    • Remove the 13 mm bolt that goes into the throttle body and brace.
    • Pull the gasket off the top of the cowl and now you can remove your intake manifold.
  4. step : Remove the fuel injectors (2:17)
    • Remove the four 10 mm bolts under the intake manifold to get at the fuel rails.
    • Pull the fuel rails up and out.
    • Stuff a clean rag in the intake to keep anything from falling into it. (this would be bad)
    • Disconnect the wiring harness connectors from the injector.
    • Unclip the fuel injector.
  5. step : Install the new fuel injector (3:35)
    • Clip in the new fuel injector.
    • Plug in the wiring connector.
    • Once you’ve replaced all the injectors, begin reassembly.
  6. step : Reassemble the intake manifold (4:07)
    • Push your fuel rails back into place.
    • Apply some loc-Tite to the four 10 mm bolts and snug them down with a socket and ratchet.
    • Bolt down the intake manifold.
    • Torque the 10 mm bolts to 105 inch/pounds
  7. step : assemble everything else (5:13)
    • Reconnect the air pressure sensor
    • Bolt in the 13 mm bolts securing the bracket to the throttle body, and torque to 15 foot/lbs
    • Reinstall the air box.
    • Tighten the clamp that connects the intake to the throttle body
    • Reconnect the hose and double check all of your sensors are connected.
    • Reinstall the fuel pump relay.
    • Seat the cowl gasket.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Liquid Thread Locker

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 11mm Socket
  • 10mm Socket
  • 12mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
It's a phenomenal product!
It's a phenomenal product! Also fast shipping, and the customer service was great!!! I recommend you all to everyone!!!!!! Thank you!
March 8, 2017
Purchased
12 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:23 min)

Tools List:

    Materials, Fluids, and Supplies

  • Liquid Thread Locker

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 11mm Socket
  • 10mm Socket
  • 12mm Socket




Vehicle Fit

  • 2005-2010 Chrysler 300 Fuel Injector 6 Piece Set V6 3.5L
  • 2005-2010 Chrysler 300 Fuel Injector 6 Piece Set V6 2.7L
  • 2005-2006 Chrysler Pacifica Fuel Injector 6 Piece Set V6 3.5L
  • 2007-2008 Chrysler Pacifica Fuel Injector 6 Piece Set V6 4.0L
  • 2004-2010 Chrysler Sebring Fuel Injector 6 Piece Set V6 2.7L
  • 2007-2010 Chrysler Sebring Fuel Injector 6 Piece Set V6 3.5L
  • 2008-2010 Chrysler Town & Country Fuel Injector 6 Piece Set V6 4.0L
  • 2008-2010 Dodge Avenger Fuel Injector 6 Piece Set V6 3.5L
  • 2008-2009 Dodge Avenger Fuel Injector 6 Piece Set V6 2.7L
  • 2009-2010 Dodge Challenger Fuel Injector 6 Piece Set V6 3.5L
  • 2006-2010 Dodge Charger Fuel Injector 6 Piece Set V6 3.5L
  • 2006-2010 Dodge Charger Fuel Injector 6 Piece Set V6 2.7L
  • 2008-2010 Dodge Grand Caravan Fuel Injector 6 Piece Set V6 4.0L
  • 2009-2010 Dodge Journey Fuel Injector 6 Piece Set V6 3.5L
  • 2005-2008 Dodge Magnum Fuel Injector 6 Piece Set V6 2.7L
  • 2005-2008 Dodge Magnum Fuel Injector 6 Piece Set V6 3.5L
  • 2007-2011 Dodge Nitro Fuel Injector 6 Piece Set V6 4.0L
  • 2004-2006 Dodge Stratus Fuel Injector 6 Piece Set V6 2.7L
Part #: 1AEEK00226

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More