Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Okay and remove this window crank. You've actually got to go right in behind and pry out lightly with your screwdriver. You can see this comes out. I want a T20 Torx screwdriver. Screw and the crank handle goes off.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Okay, friends. It's time to get started on installing our window crank. If you were to turn it over, you're gonna see right along the back, it's two pieces. Take a nice, small pocket screwdriver, come right in between these two areas, and then, just gently pry. We wanna try to pry and separate these two, and I'll show you why. As I separate them, I'm gonna go ahead and lift and give it a twist, and you're gonna see there's a screw. This is your mounting screw. We're gonna need a Torx bit to install it onto our vehicle, so here we go.
To get this off of here, we need to get the outer plastic out of the way. As you saw in the other one, it's much easier to get from the backside. With that said, I wanna carefully come in between here and there and just see if I can pry it. I'm gonna do the same thing on this one, down on the lower area. Now, I can pull this, and we can get to that mounting screw.
So now, let's just pay attention to the direction that this is facing in. That's the way that we want it to go back together when we put on the new one. So now, we're gonna use a bit that looks like this. This is a T20. It looks like a star. And you need a nice, long one like this because it has to get down into the hole. Loosen this up, I'll completely remove the screw, and then we'll get this right off. There it is.
Now, it's gonna be time to install our new crank handle. You wanna make sure that you reuse this piece right here. I'm just gonna put it right like that, and I'll line this up in the same direction that it was when I removed it. Put in your brand new screw. We'll go ahead and snug this right up. Okay, that's nice and snug. Bring this up. All right. And now, let's test it. Perfect.
