Replaces

Ford Wheel Bearing & Hub Assembly TRQ BHA53921 - 1ASHF00047

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 4 Bolt Flange
  • Fits 8 Lug Wheel (Coarse Thread)
  • Includes ABS sensor
  • Studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Correct for Excursion & Super Duty (SD) trucks that have 4wd, 4 wheel ABS, SRW (single rear wheels), & 13mm thick hub flange
  • Will not fit trucks with 10mm thick hubs because it will cause the front brakes to drag

Note: For 1999 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
1
0
0
0
Exactly as described. On time. Will be ordering more parts from 1a auto when i am in need
September 1, 2017
Purchased
8 months ago
part came fast and fit exactly as my original I would definitely buy from them again no issues at all
February 21, 2018
Purchased
2 months ago
Rolls smooth great value
Paid over $400 to get a wheel bearing replacement a couple of years ago. So glad I did it myself this time. Roughly $90 for the bearing from 1aauto and about $45 in tools (autozone) to get the job done, and my truck is rolling smooth again. So saved around $260 thanks to 1aauto and the repair videos made getting the job done a breeze for a non mechanically certified diy'er.
March 18, 2018
Purchased
1 month ago
Misleading torque instructions
Part worked well. This part mounted on Ford Excursion or F250 4wd does not have an axel nut to lock on the drive axel but a C- clip and shim set. Following mounting torque instructions would suggest the 4 mounting nuts would have a final torque in the inch pound setting range. Ford specs for the hub mounting nuts is 55 ft-lb.
July 1, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
Does it come with mounting hardware and o ring?
Joe S on Mar 26, 2017
BEST ANSWER: Yes o-ring is on the hub. You get 4 new mounting studs but you will need to use the nouts off the original hub.

Vehicle Fit

  • 2000-2001 Ford Excursion 4 Wheel Drive with Coarse Thread Wheel Studs Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2002 Ford Excursion 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 1999 Ford F250 Super Duty Truck 4 Wheel Drive (Built After 3/22/99 Production Date) 4 Wheel ABS Brakes with Coarse Thread Wheel Studs Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2000-2002 Ford F250 Super Duty Truck 4 Wheel Drive 4 Wheel ABS Brakes with Coarse Thread Wheel Studs Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 1999 Ford F350 Super Duty Truck 4 Wheel Drive (Built After 3/22/99 Production Date) 4 Wheel ABS Brakes with Coarse Thread Wheel Studs with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2000-2002 Ford F350 Super Duty Truck 4 Wheel Drive 4 Wheel ABS Brakes with Coarse Thread Wheel Studs with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ

This part replaces:

  • OE # F81A2B663BH
  • OE # F81A2B663BG
  • OE # YC352B663BA
  • OE # YC352B513BA
  • OE # F81Z1104BH
  • OE # F81Z1104BG
  • Hollander 538-01494
  • TRQ BHA53921
Part #: 1ASHF00047



TRQ
Brand #: BHA53921