Replaces

Ford Upper Intake Manifold (One Piece Design) - 1AEIM00023

Frequently bought together

Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • One piece design
  • Reinforced aluminum coolant crossover - eliminates failure due to corrosion or vibration
  • Re-engineered reinforced plastic
  • Intake gaskets molded into the intake manifold
  • Fits the following Ford engines as listed per application:
    • V8 5.4L SOHC

Kit includes:

  • Complete improved intake manifold with new aluminum crossover
  • New thermostat, o-ring, and screws
  • Everything needed to do the job right the 1st time

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.00/ 5.0
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
Works Fine
Even thought it was a little smaller in size than the OEM, the mechanic had no problem installing it. I arrived quickly!
September 26, 2017
Great fit
The after market design was a perfect fit, I recommend using it. It took about 2 hours to install with all accessories..
March 6, 2018
Dorman intake manifold for 2001 f150 5.4
Came just as promised... It is a direct replacement for the original ford manifold... Installed myself... Fit perfectly... Ive read other people say they lost power with it... I have not noticed any power loss, if anything it seems to have a little more power... Noise wise, it may be just barely louder, but really not noticeable.... Would buy again...
April 19, 2019
Exact fit
Ordered this intake for my 2002 F150. Item arrived very quickly. Install was pretty straight forward with no issues. I especially like the fact that the gasket was already incorporated into the intake. I also replaced my valve cover gaskets during this install. Customer service was very responsive when I had a question about the intake prior to purchase. Gary B.
June 24, 2019
Needed bad
Perfect replacement. Fast shipping. No hassles
August 27, 2019
my parts came in fast, and they were the perfect fit.
September 20, 2019
Working Good
Replaced this about a week ago. Gaskets sealed well, and no problems as of yet. Bet part about it is it was half the price of all my local parts houses.
October 14, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
USA made?
Frank R August 23, 2017
These are built in either Taiwan or China.
Alex P August 25, 2017
Why is the lower manifold so much smaller then oem version? Will that decrease my trucks performance?
Will F September 24, 2017
You will not encounter a decrease in the trucks performance. Our vendors created an upgraded design due to common failure points on the OE design, but made them to exceed the OE style specifications.
Alex P September 25, 2017
It will not change the performance. It looks smaller because the aftermarket one comes as the full unit and deleted casing that the oem one sat in. Just sets right in, and also deleted the need to have to take out the entire middle to get to it.
Justin J September 25, 2017
No u will get the same performance that the truck always gat. I was concerned about that also when I bought mine but after putting it on and seeing it work I got the same performance that I got with the OEM version
Lemuel A September 25, 2017
Do I remove the old gasket thats stuck on the cylinder head and then just bolt this unit straight on the head?
Robert B February 14, 2018
Thanks for your question! You will want to completely remove and clean the mounting surfaces to allow the new gasket to seal properly. Thank you!
Adam G February 15, 2018
yes and there are great u tube videos just type in how to replace a ford intake manifold there one that a ford guy take you throw the hole job
Jeffery K February 16, 2018
Remove old gaskets, clean mounting surface. Unit has gaskets manufactured in. Then just bolt in place
V R April 6, 2018
Will that fit a 4.6 V8?
R M May 3, 2018
No this will not fit a 4.6L engine.
Tim K May 3, 2018
Will this fit a 2004 F150 5.4 3V?
Jason M July 25, 2018
This is only listed to fit 2004 Ford F-150 Heritage Models. It will not fit your vehicle if it is not a Heritage Model.
Christa R July 25, 2018
Does this set come with the intake gaskets as well with the crossover gaskets?
Armando V October 16, 2019
Yes it does. The gaskets are built into the manifold and crossover. I installed this intake manifold on a 2001 Ford Expedition a couple years ago and have had no issues with it.
Techie T October 17, 2019
This will come with the intake manifold gaskets already molded on. Please let us know if you have any further questions.
Emma F October 17, 2019
Year Make Model Description
2000-2003Ford E150 Van Ford E150 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
2004-2014Ford E150 Van Ford E150 Van Upper Intake Manifold (One Piece Design) V8 5.4L
2000-2003Ford E250 Van Ford E250 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
2004-2014Ford E250 Van Ford E250 Van Upper Intake Manifold (One Piece Design) V8 5.4L
2000-2003Ford E350 Van Ford E350 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
2004-2005Ford E350 Van Ford E350 Van Upper Intake Manifold (One Piece Design) V8 5.4L
2000-2003Ford E350 Van Super Duty Ford E350 Van Super Duty Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
2004-2014Ford E350 Van Super Duty Ford E350 Van Super Duty Upper Intake Manifold (One Piece Design) V8 5.4L
2000-2003Ford E450 Van Ford E450 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
2004-2014Ford E450 Van Ford E450 Van Upper Intake Manifold (One Piece Design) V8 5.4L
2000-2005Ford Excursion Ford Excursion Upper Intake Manifold (One Piece Design) V8 5.4L
2000-2004Ford Expedition Ford Expedition Upper Intake Manifold (One Piece Design) V8 5.4L
2010Ford Expedition Ford Expedition Upper Intake Manifold (One Piece Design) V8 5.4L
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Upper Intake Manifold (One Piece Design) V8 5.4L SOHC (excluding Lightning Models)
2000-2003Ford F150 Truck Ford F150 Truck Upper Intake Manifold (One Piece Design) V8 5.4L SOHC (excluding Lightning Models)
2000-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
2000-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck Upper Intake Manifold (One Piece Design) V8 5.4L
Part 1AEIM00023
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.