Replaces

Ford Taurus Mercury Sable Tie Rod - 1ASFK02212

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

Specifications:

  • Brand New Tie Rods
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Inner & Outer
  • Built to strict quality control standards
  • Direct Replacements

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove Wheel (2:25)
    • Remove lug nuts and remove wheel.
  2. step : Remove tie rod (2:37)
    • Remove cotter pin.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Install new tie rod (5:30)
    • Use the old nut to mark the bolt with tape.
    • Use a vice grip and an adjustable wrench to remove the nut, using penetrating oil if need be.
    • Replace bolt with new one, compensating for any difference in width.
    • Use your two adjustable wrenches to tighten the nut up against the tie rod end.
    • Use your torque wrench to tighten up the nut on the end of the tie rod and put the cotter pin in.
    • Put the grease fitting in.
    • Use grease gun to fill boot with grease.
  4. step : Put wheel back on (9:48)
    • Use the star pattern to tighten the lugs to 90 to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller
  • Vise-Grips

  • Wrenches - Metric

  • 8mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect
I would recommend this to anyone its reasonably priced and perfect fit good quality
September 29, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this set of 4 cover all 4 tires or just 1 set of 2??
Alyssa M December 16, 2016
just the front set as the back set does not use tie rods
Ray T December 16, 2016
This package is for the front left and front right tires only.
Don B December 16, 2016
This will replace the inner and outer tie rods on only the front two tires.
Alex P December 20, 2016
Wheres this part made?
Steve A September 12, 2017
Most of our vendors for these parts are from China or Taiwan.
Tim K September 12, 2017
Year Make Model Description
1996-1999Ford Taurus Ford Taurus (excluding SHO Models) Inner & Outer Tie Rod 4 Piece Set
2000-2007Ford Taurus Ford Taurus Inner & Outer Tie Rod 4 Piece Set
1996-2005Mercury Sable Mercury Sable Inner & Outer Tie Rod 4 Piece Set
Part #: 1ASFK02212


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:21 min)