Replaces

Ford Taurus Mercury Sable Tie Rod MOOG ES3349RL - MGSFK00024

MOOG ES3349RL [FRONT OUTER TIE ROD ENDS]

These Moog brand front outer tie rod ends are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) OUTER
  • Replaces one of many dealer part numbers including: 3F1Z-3A130-AA, F6DZ-3A130-A, 3F1Z3A130AA, F6DZ3A130A
  • Connect to inner tie rod
  • Direct replacements
  • Built to strict quality control standards
  • Grease-able

When installed correctly and an alignment performed, these outer tie rods could also reduce uneven tire wear.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove Wheel (2:25)
    • Remove lug nuts and remove wheel.
  2. step : Remove tie rod (2:37)
    • Remove cotter pin.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Install new tie rod (5:30)
    • Use the old nut to mark the bolt with tape.
    • Use a vice grip and an adjustable wrench to remove the nut, using penetrating oil if need be.
    • Replace bolt with new one, compensating for any difference in width.
    • Use your two adjustable wrenches to tighten the nut up against the tie rod end.
    • Use your torque wrench to tighten up the nut on the end of the tie rod and put the cotter pin in.
    • Put the grease fitting in.
    • Use grease gun to fill boot with grease.
  4. step : Put wheel back on (9:48)
    • Use the star pattern to tighten the lugs to 90 to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller
  • Vise-Grips

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1996-2007Ford Taurus Ford Taurus Pair Tie Rod Outer MOOG ES3349RL
1996-2005Mercury Sable Mercury Sable Pair Tie Rod Outer MOOG ES3349RL

This part replaces:

  • MOOG ES3349RL
Only 1 left in stock
Part #: MGSFK00024


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

MOOG
Brand #: ES3349RL

How-to Video:

(10:21 min)