Replaces

Ford Taurus Mercury Sable Suspension Kit - 1ASFK02055

These replacement strut and spring assemblies & sway bar links are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a SET of 4
    • (2) - FRONT Strut & Spring Assemblies - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar Links - LH (Driver Side) & RH (Passenger Side)
  • Each strut assembly includes:
    • Replacement upper mount
    • Upper and lower spring isolator
    • Upper spring seat
    • Coil spring
    • Boot kit
  • Do NOT fit models with Electronic or Air Suspension

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts with your lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the front strut (1:31)
    • Use penetrating oil on the strut and shock bolts.
    • Unbolt and unclip the ABS sensor line.
    • Remove the upper stabilizer bolt with an 18 mm wrench.
    • Unbolt the lower end of the strut and use a hammer to work the bolt out.
    • Use a hammer to separate the steering knuckle and the strut.
    • Remove the three 13 mm bolts at the top of the strut.
  3. step : Install the new strut (4:05)
    • Finesse the strut into place and bolt in the three 13 mm bolts
    • Torque the three 13 mm bolts to 35 ft lbs.
    • Taking care not to damage the brake lines, work the bottom of the strut into the steering knuckle.
    • Bolt in the bottom of the strut, torquing the bottom bolt to 100 ft lbs.
    • Bolt the stabilizer link back in, using your 18 mm wrench to tighten it up.
    • Clip the ABS sensor and brake line bracket back together and bolt it back in place.
  4. step : Put the wheel back on (8:38)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the car
    • Torque the lug nuts using a star pattern from 75-100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket
  • 16mm Socket
  • 14mm Socket
  • 18mm Socket
  • 17mm Socket
  • 12mm Socket
  • 11mm Socket
  • 15mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 10mm Wrench
  • 21mm wrench
  • 13mm Wrench
  • 12mm Wrench
  • 16mm Wrench
  • 11mm Wrench
  • 17mm Wrench
  • 19mm Wrench
  • 18mm Wrench
  • 14mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Good business
The package came earlier than I expected and everything looked pretty good just as It shows online.
September 27, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-1999 Ford Taurus (excluding SHO Models) without Electronic Suspension 4 Piece Set Suspension Kit
  • 2000-2007 Ford Taurus 4 Piece Set Suspension Kit
  • 1996-2005 Mercury Sable 4 Piece Set Suspension Kit

This part replaces:

  • Monroe 171615
  • Moog K8734
  • Moog K8735
  • Monroe 181615
  • KYB SR4010
Part #: 1ASFK02055



How-to Video:

(09:39 min)