Replaces

Ford Taurus Mercury Sable Suspension Kit - 1ASFK02044

Specifications:

  • Fits both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Include:
    • Replacement upper mounts
    • Upper and lower spring isolators
    • Upper spring seats
    • Coil springs
    • Boot kits
    • Sway Bar End Links
  • Preassembled for easier replacement
  • Fits 4 Door Sedan Models only
  • Do not fit models with Electronic or Air Suspension

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Rear Strut & Spring Assemblies
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Kit Includes: (2) Front Strut & Spring Assemblies

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts with your lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the front strut (1:31)
    • Use penetrating oil on the strut and shock bolts.
    • Unbolt and unclip the ABS sensor line.
    • Remove the upper stabilizer bolt with an 18 mm wrench.
    • Unbolt the lower end of the strut and use a hammer to work the bolt out.
    • Use a hammer to separate the steering knuckle and the strut.
    • Remove the three 13 mm bolts at the top of the strut.
  3. step : Install the new strut (4:05)
    • Finesse the strut into place and bolt in the three 13 mm bolts
    • Torque the three 13 mm bolts to 35 ft lbs.
    • Taking care not to damage the brake lines, work the bottom of the strut into the steering knuckle.
    • Bolt in the bottom of the strut, torquing the bottom bolt to 100 ft lbs.
    • Bolt the stabilizer link back in, using your 18 mm wrench to tighten it up.
    • Clip the ABS sensor and brake line bracket back together and bolt it back in place.
  4. step : Put the wheel back on (8:38)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the car
    • Torque the lug nuts using a star pattern from 75-100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket
  • 16mm Socket
  • 14mm Socket
  • 18mm Socket
  • 17mm Socket
  • 12mm Socket
  • 11mm Socket
  • 15mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 10mm Wrench
  • 21mm wrench
  • 13mm Wrench
  • 12mm Wrench
  • 16mm Wrench
  • 11mm Wrench
  • 17mm Wrench
  • 19mm Wrench
  • 18mm Wrench
  • 14mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great company to find
I would recommend everyone to at least try A-1 auto once and they Will not be disappointed, the number one reason for giving them a chance is because of their YouTube videos, by them putting out their videos saved me hundreds of dollars and are very easy to follow. I would like to thank A-1auto for all their help, I will continue to use their videos and buy my auto parts from them.
October 27, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-1999 Ford Taurus 4 Door Sedan Front & Rear Suspension Kit 8 Piece Set without Electronic Suspension (excluding SHO Models)
  • 2000-2007 Ford Taurus 4 Door Sedan Front & Rear Suspension Kit 8 Piece Set
  • 1996-2005 Mercury Sable 4 Door Sedan Front & Rear Suspension Kit 8 Piece Set

This part replaces:

  • Monroe 181616
  • Monroe 181615
  • Monroe 171616
  • Monroe 171615
  • KYB SR4011
  • KYB SR4010
  • Moog K3124
  • Moog K8734
  • Moog K8735
  • Hollander 527-01225
Part #: 1ASFK02044

How-to Video:

(09:39 min)