Replaces

Ford Taurus Mercury Sable Strut & Spring Assembly TRQ SCA57014 - 1ASSP00298

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts with your lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the front strut (1:31)
    • Use penetrating oil on the strut and shock bolts.
    • Unbolt and unclip the ABS sensor line.
    • Remove the upper stabilizer bolt with an 18 mm wrench.
    • Unbolt the lower end of the strut and use a hammer to work the bolt out.
    • Use a hammer to separate the steering knuckle and the strut.
    • Remove the three 13 mm bolts at the top of the strut.
  3. step : Install the new strut (4:05)
    • Finesse the strut into place and bolt in the three 13 mm bolts
    • Torque the three 13 mm bolts to 35 ft lbs.
    • Taking care not to damage the brake lines, work the bottom of the strut into the steering knuckle.
    • Bolt in the bottom of the strut, torquing the bottom bolt to 100 ft lbs.
    • Bolt the stabilizer link back in, using your 18 mm wrench to tighten it up.
    • Clip the ABS sensor and brake line bracket back together and bolt it back in place.
  4. step : Put the wheel back on (8:38)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the car
    • Torque the lug nuts using a star pattern from 75-100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket
  • 16mm Socket
  • 14mm Socket
  • 18mm Socket
  • 17mm Socket
  • 12mm Socket
  • 11mm Socket
  • 15mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 10mm Wrench
  • 21mm wrench
  • 13mm Wrench
  • 12mm Wrench
  • 16mm Wrench
  • 11mm Wrench
  • 17mm Wrench
  • 19mm Wrench
  • 18mm Wrench
  • 14mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great product , fast shipping , exact fit. My car rides new again
February 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
What brand are the struts/springs?
Jim D on Apr 17, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

Year Make Model Description
1996-1999Ford Taurus Ford Taurus Sedan Front & Rear Strut & Spring Assembly 4 Piece Set (excluding SHO Models) without Electronic Suspension TRQ SCA57014
2000-2007Ford Taurus Ford Taurus Sedan Front & Rear Strut & Spring Assembly 4 Piece Set TRQ SCA57014
1996-2005Mercury Sable Mercury Sable Sedan Front & Rear Strut & Spring Assembly 4 Piece Set TRQ SCA57014

This part replaces:

  • Monroe 181616
  • Monroe 181615
  • Monroe 171616
  • Monroe 171615
  • KYB SR4011
  • KYB SR4010
  • Hollander 527-01225
  • KYB SR4009
  • TRQ SCA57014
Part #: 1ASSP00298


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SCA57014

How-to Video:

(09:39 min)