Replaces

Ford Taurus Mercury Sable Strut & Spring Assembly Monroe Econo-Matic 181615, 181616 - MNSSP00736

Part Details

  • Quantity: 4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Why Buy Econo-Matic Strut Assemblies?

Econo-Matic strut assemblies are an economical and easy-to-install alternative. Some of its benefits include:

 

  • Quicker installation time
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

 

Item Condition: New

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts with your lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the front strut (1:31)
    • Use penetrating oil on the strut and shock bolts.
    • Unbolt and unclip the ABS sensor line.
    • Remove the upper stabilizer bolt with an 18 mm wrench.
    • Unbolt the lower end of the strut and use a hammer to work the bolt out.
    • Use a hammer to separate the steering knuckle and the strut.
    • Remove the three 13 mm bolts at the top of the strut.
  3. step : Install the new strut (4:05)
    • Finesse the strut into place and bolt in the three 13 mm bolts
    • Torque the three 13 mm bolts to 35 ft lbs.
    • Taking care not to damage the brake lines, work the bottom of the strut into the steering knuckle.
    • Bolt in the bottom of the strut, torquing the bottom bolt to 100 ft lbs.
    • Bolt the stabilizer link back in, using your 18 mm wrench to tighten it up.
    • Clip the ABS sensor and brake line bracket back together and bolt it back in place.
  4. step : Put the wheel back on (8:38)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the car
    • Torque the lug nuts using a star pattern from 75-100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket
  • 16mm Socket
  • 14mm Socket
  • 18mm Socket
  • 17mm Socket
  • 12mm Socket
  • 11mm Socket
  • 15mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 10mm Wrench
  • 21mm wrench
  • 13mm Wrench
  • 12mm Wrench
  • 16mm Wrench
  • 11mm Wrench
  • 17mm Wrench
  • 19mm Wrench
  • 18mm Wrench
  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1996-1999Ford Taurus Ford Taurus Front & Rear Strut & Spring Assembly 4 Piece Set (excluding SHO Models) without Electronic Suspension Monroe Econo-Matic 181615, 181616
2000-2007Ford Taurus Ford Taurus Front & Rear Strut & Spring Assembly 4 Piece Set Monroe Econo-Matic 181615, 181616
1996-2005Mercury Sable Mercury Sable Front & Rear Strut & Spring Assembly 4 Piece Set Monroe Econo-Matic 181615, 181616

This part replaces:

  • Monroe Econo-Matic 181615, 181616
Part #: MNSSP00736

Out of Stock

Monroe Econo-Matic
Brand #: 181615, 181616

How-to Video:

(09:39 min)