Replaces

Ford Taurus Mercury Sable Strut & Spring Assembly Front Pair Monroe Quick-Strut 171615 - MNSSP00017

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts with your lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the front strut (1:31)
    • Use penetrating oil on the strut and shock bolts.
    • Unbolt and unclip the ABS sensor line.
    • Remove the upper stabilizer bolt with an 18 mm wrench.
    • Unbolt the lower end of the strut and use a hammer to work the bolt out.
    • Use a hammer to separate the steering knuckle and the strut.
    • Remove the three 13 mm bolts at the top of the strut.
  3. step : Install the new strut (4:05)
    • Finesse the strut into place and bolt in the three 13 mm bolts
    • Torque the three 13 mm bolts to 35 ft lbs.
    • Taking care not to damage the brake lines, work the bottom of the strut into the steering knuckle.
    • Bolt in the bottom of the strut, torquing the bottom bolt to 100 ft lbs.
    • Bolt the stabilizer link back in, using your 18 mm wrench to tighten it up.
    • Clip the ABS sensor and brake line bracket back together and bolt it back in place.
  4. step : Put the wheel back on (8:38)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the car
    • Torque the lug nuts using a star pattern from 75-100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket
  • 16mm Socket
  • 14mm Socket
  • 18mm Socket
  • 17mm Socket
  • 12mm Socket
  • 11mm Socket
  • 15mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 10mm Wrench
  • 21mm wrench
  • 13mm Wrench
  • 12mm Wrench
  • 16mm Wrench
  • 11mm Wrench
  • 17mm Wrench
  • 19mm Wrench
  • 18mm Wrench
  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-1999 Ford Taurus Front Strut & Spring Assembly (excluding SHO Models) without Electronic Suspension Pair Monroe Quick-Strut 171615
  • 2000-2007 Ford Taurus Front Strut & Spring Assembly Pair Monroe Quick-Strut 171615
  • 1996-2005 Mercury Sable Front Strut & Spring Assembly Pair Monroe Quick-Strut 171615

This part replaces:

  • Monroe Quick-Strut 171615
Only 1 left in stock
Part #: MNSSP00017



Monroe Quick-Strut
Brand #: 171615

How-to Video:

(09:39 min)