Replaces

Ford Taurus Mercury Sable Steering & Suspension Kit - 1ASFK04246

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Bearing Type:   Ball Bearing
  • Quantity:   6 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front CV Axles
      (2) Front Hub Assemblies

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 6
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove Wheel (2:25)
    • Remove lug nuts and remove wheel.
  2. step : Remove tie rod (2:37)
    • Remove cotter pin.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Install new tie rod (5:30)
    • Use the old nut to mark the bolt with tape.
    • Use a vice grip and an adjustable wrench to remove the nut, using penetrating oil if need be.
    • Replace bolt with new one, compensating for any difference in width.
    • Use your two adjustable wrenches to tighten the nut up against the tie rod end.
    • Use your torque wrench to tighten up the nut on the end of the tie rod and put the cotter pin in.
    • Put the grease fitting in.
    • Use grease gun to fill boot with grease.
  4. step : Put wheel back on (9:48)
    • Use the star pattern to tighten the lugs to 90 to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller
  • Vise-Grips

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1996-2007Ford Taurus Ford Taurus Steering & Suspension Kit 6 Piece Set V6 3.0L Flex Fuel for Models with with AX4S Automatic Transmission (8th Vin Digit 1, 2, or U)
1996-2007Ford Taurus Ford Taurus Steering & Suspension Kit 6 Piece Set V6 3.0L for Models with with AXOD-E / 4F50N Automatic Transmission (8th Vin Digit 1, 2, or U) Flex Fuel
1996-2004Mercury Sable Mercury Sable Steering & Suspension Kit 6 Piece Set V6 3.0L Flex Fuel for Models with with AX4S Automatic Transmission (8th Vin Digit 1, 2, or U)
1996-2004Mercury Sable Mercury Sable Steering & Suspension Kit 6 Piece Set V6 3.0L Flex Fuel for Models with with AXOD-E / 4F50N Automatic Transmission (8th Vin Digit 1, 2, or U)
1996-2004Mercury Sable Mercury Sable Steering & Suspension Kit 6 Piece Set V6 3.0L (8th Vin Digit S) with AXOD-E / 4F50N Automatic Transmission
Part #: 1ASFK04246

Out of Stock

How-to Video:

(10:21 min)