Ford Taurus Mercury Sable Steering & Suspension Kit - 1ASFK00439

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as a Set of 8
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove Wheel (2:25)
    • Remove lug nuts and remove wheel.
  2. step : Remove tie rod (2:37)
    • Remove cotter pin.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Install new tie rod (5:30)
    • Use the old nut to mark the bolt with tape.
    • Use a vice grip and an adjustable wrench to remove the nut, using penetrating oil if need be.
    • Replace bolt with new one, compensating for any difference in width.
    • Use your two adjustable wrenches to tighten the nut up against the tie rod end.
    • Use your torque wrench to tighten up the nut on the end of the tie rod and put the cotter pin in.
    • Put the grease fitting in.
    • Use grease gun to fill boot with grease.
  4. step : Put wheel back on (9:48)
    • Use the star pattern to tighten the lugs to 90 to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller
  • Vise-Grips

  • Wrenches - Metric

  • 8mm Wrench

4.25/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
should be greasable
overall kit worked fine, would prefer with grease fitting
March 3, 2017
Steering suspension kit
I really love my new steering suspension, the car handles so much better. Thank you, 1A Auto , I have been shopping with you for awhile and I tell everyone about your company. I hope that you can always be there for myself and many more customers.
June 24, 2017
Ford 2002 taurus DOHC
Great price! Great part! Great DIY videos also . Peace
August 2, 2017
Good quality.
Great inexpensive kit. No problems with install. Perfect fit for my 2003 Ford Taurus.
September 25, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What is the quality of these parts, an what is the brand name of them?
Andrew S February 3, 2016
As I recall, it was a no-name - off brand, hence the extremely low price. I felt the quality was acceptable and certainly feel that it posed no safety issues.
Scott D February 3, 2016
I bought them because this is a very good deal, I never used them, because the front shimmering was a wear spot in the back rear passanfer tire. The quality looks very good.
Jonathon L February 3, 2016
dont know the brand but no promblems with parts and they exact fit
Lynn K February 3, 2016
They are working just fine went on easy
Monica D February 3, 2016
I cannot remember the maker, but the parts exceeded manufacturer quality as they are not plastic. The OEM units wear and clunk, especially the plastic vertical member. Just that part corrected the noise typically made when they wear (clunk on bumps- loose ball joint).
Yardsale503 N February 4, 2016
Hello, These are a house branded kit. We feel the quality is very good as we have a lifetime warranty against manufacturer defects on the entire kit.
Brian F February 4, 2016
Year Make Model Description
1996-1999Ford Taurus Ford Taurus Steering & Suspension Kit 8 Piece Set
2000-2007Ford Taurus Ford Taurus (excluding SHO Models) 8 Piece Set Steering & Suspension Kit
1996-2005Mercury Sable Mercury Sable 8 Piece Set Steering & Suspension Kit
Part #: 1ASFK00439

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:21 min)