Ford Taurus Mercury Sable Radiator Overflow Bottle - 1AROB00006

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Our coolant bottles are some of the highest quality replacements on the market! This Ford Taurus radiator coolant overflow bottle has been designed to replace the original Ford design.


  • Direct replacement for originals that are cracked or broken
  • Strengthened and redesigned in the vulnerable areas of failure
  • Plastic construction
  • Comes with correct 16 psi cap
  • Does not include low fluid sensor
    • Buyer may reuse original
  • Fits models with V6 3.0L 24V DOHC Engine Only

Now you can buy a high quality coolant reservoir that is built to strict quality control standards. REPLACE your broken or cracked one now with this great fitting Ford Taurus Radiator Overflow Bottle.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Coolant Bottle (1:05)
    • Make sure the engine is cold
    • Loosen the hose clamps with pliers
    • Separate the two upper hoses from the coolant overflow bottle
    • Remove the 10mm bolts from the coolant bottle
    • Have a drain pan ready
    • Pull the coolant bottle up and off
  2. step : Removing a Stuck Lower Bolt (2:39)
    • Remove the Phillips head screws from the inner fender
    • Remove the 7/32 inch bolt from the inner fender
    • Remove the rubber plug from the inner fender with pliers
    • Punch the stuck bolt out with a hammer and punch
    • Pull the coolant bottle up and off, if you haven't already done so
  3. step : Installing the Coolant Bottle (5:24)
    • Put the coolant bottle into place
    • Connect the hoses to the coolant bottle
    • Tighten the clamps with the pliers
    • Fasten the 10mm bolts for the coolant bottle
    • If you punched out the lower bolt, replace it with a new bolt and nut
  4. step : Reassembling the Wheel Well (7:33)
    • Line up the inner fender
    • Fasten the Phillips had screws into the inner fender
    • Fasten the 7/32 inch bolt into the inner fender
    • Push the rubber plug into the inner fender

Tools needed for replacement:

    General Tools

  • Hammer
  • Center Punch
  • Drain Pan

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I was satisfied with my part thank you and I will use you again
I would definitely recommend you guys for parts very reasonable I shopped around and someone told me about you guys and I used you and I was very satisfied with the part it was the right part and everything when I called in to help with very helpful and getting me the right part and I thank you guys for your service and will use you again
December 11, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I see no other place to add coolant/water to radiator. Is this it?
SUZANNE S December 31, 2017
Yes Enter
Tom H December 31, 2017
Lisa R December 31, 2017
Yes, this is where you would add the coolant to flow to the radiator.
Alex P January 3, 2018
Year Make Model Description
1996-2007Ford Taurus Ford Taurus Radiator Overflow Bottle V6 3.0L DOHC (8th Vin Digit S)
1996-2006Mercury Sable Mercury Sable Radiator Overflow Bottle V6 3.0L DOHC (8th Vin Digit S)
Part #: 1AROB00006

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:23 min)