This replacement mirror is just what you need to get your car in good looking form again!

This mirror features the following specifications:

  • RH (passenger's side)
  • Power mirror
  • Heated mirror
  • Non-folding
  • With puddle lamp
  • Injection molded plastic housing
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a great replacement and has substantial cost savings over a dealer unit.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Part Details

  • Mirror Puddle Light Type: Puddle Light
  • Mirror Heating Type: Heated
  • Mirror Operation: Power
  • Mirror Color / Finish: Smooth Black - Paint to Match

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:02)
    • Remove the negative battery cable using an 8mm socket or wrench.
    • Remove all the Phillips screws around the outside of the door panel and behind the door pull handle.
    • Use a door panel clip tool or putty knife and find the clips behind the door. Then pry up on the clip.
    • Lift the door panel up and off.
    • Disconnect the harnesses on the back of the door panel.
  2. step : Removing the Side Mirror (3:38)
    • Remove the 6mm bolt under the triangle panel.
    • Remove the triangle panel.
    • Pull off the cover.
    • Disconnect the connector from the mirror.
    • Remove the three 11mm nuts securing the side mirror.
    • Pull the mirror off.
  3. step : Replacing the Side Mirror (4:47)
    • Put the harness through the door.
    • Line up the mirror and press it into place.
    • Replace the three 11mm nuts.
    • Plug in the mirror harness.
    • Replace the insulator cover.
    • Replace the triangle panel and the screw that secures it.
  4. step : Replacing the Door Panel (6:44)
    • Reconnect all of the harness on the back of the door panel.
    • Line the door panel up and over the door handle. Lift it over the lock and push the door panel into place.
    • Replace the Phillips screws along the outside of the door panel.
    • Replace the two Phillips screws behind the door pull handle.
    • Replace the negative battery cable.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 6mm Socket
  • 8mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Right side 2003 Ford Taurus Door Mirror
I watched the video and installed the mirror. It took me about an hour to complete (it probably would have been less time from someone that has done it before)
Perfect fit... No problems.
March 5, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Ford Taurus Power Heated Puddle Light Smooth Black - Paint to Match Mirror Passenger Side
  • 2002-2005 Mercury Sable Power Heated Puddle Light Smooth Black - Paint to Match Mirror Passenger Side

This part replaces:

  • Partslink FO1321220
  • Hollander 128-00667
  • OE # 2F1Z 17682 BA
Part #: 1AMRE01016

How-to Video:

(08:54 min)