1ASFK02212-Ford Taurus Mercury Sable Inner & Outer 4 Piece Tie Rod Set


Ford Taurus Mercury Sable Inner & Outer 4 Piece Tie Rod Set


Part Details

  • Set Quantity: 4 Piece

This part replaces:

  • Moog ES3349RL
  • Moog EV398
  • OE # F6DZ3280AA
  • OE # 1F1Z3280AA
Part 1ASFK02212
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA55108

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   4 Piece


  • Brand New Tie Rods
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Inner & Outer
  • Built to strict quality control standards
  • Direct Replacements

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove Wheel (2:25)
    • Remove lug nuts and remove wheel.
  2. step : Remove tie rod (2:37)
    • Remove cotter pin.
    • Use your tie rod puller to pull the tie rod up.
    • Use your two adjustable wrenches to remove the tie rod.
  3. step : Install new tie rod (5:30)
    • Use the old nut to mark the bolt with tape.
    • Use a vice grip and an adjustable wrench to remove the nut, using penetrating oil if need be.
    • Replace bolt with new one, compensating for any difference in width.
    • Use your two adjustable wrenches to tighten the nut up against the tie rod end.
    • Use your torque wrench to tighten up the nut on the end of the tie rod and put the cotter pin in.
    • Put the grease fitting in.
    • Use grease gun to fill boot with grease.
  4. step : Put wheel back on (9:48)
    • Use the star pattern to tighten the lugs to 90 to 100 ft lbs.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller
  • Vise-Grips

  • Wrenches - Metric

  • 8mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this set of 4 cover all 4 tires or just 1 set of 2??
Alyssa M December 16, 2016
just the front set as the back set does not use tie rods
Ray T December 16, 2016
This package is for the front left and front right tires only.
Don B December 16, 2016
This will replace the inner and outer tie rods on only the front two tires.
Alex P December 20, 2016
Wheres this part made?
Steve A September 12, 2017
Most of our vendors for these parts are from China or Taiwan.
Tim K September 12, 2017
Mine where from China
C H November 10, 2019
China or Taiwan
C H January 7, 2020

Fits the following Makes:

Year Make Model Description
1996-1999Ford Taurus Ford Taurus LX Inner & Outer 4 Piece Tie Rod Set
1996-1999Ford Taurus Ford Taurus SE Inner & Outer 4 Piece Tie Rod Set
1996-1997Ford Taurus Ford Taurus GL Inner & Outer 4 Piece Tie Rod Set
1996-1997Ford Taurus Ford Taurus G Inner & Outer 4 Piece Tie Rod Set
1998-1999Ford Taurus Ford Taurus SE Comfort Inner & Outer 4 Piece Tie Rod Set
2000-2007Ford Taurus Ford Taurus Inner & Outer 4 Piece Tie Rod Set
1996-2005Mercury Sable Mercury Sable Inner & Outer 4 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS02080
DIY Solutions SUS07343
DIY Solutions SUS07333
MOOG Chassis Products EV398
MOOG Chassis Products ES3349RL

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA55108
Product Reviews
5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I would recommend this to anyone its reasonably priced and perfect fit good quality
September 29, 2018
Great service and fast shipping
I had been driving with a rejection sticker for over a year because of my tie rod.. I finally was able to get some money together . 1A was easy to buy from as their website was very helpful. The part I needed came within 3 days and I was able to get it fixed and got my sticker and am now driving with no worries. Thank you 1A..!
February 18, 2019
Good parts with no hassle
I needed parts for my 2003 Ford Taurus. The local prices were ok, but 1As prices were much better. Shipping was right on time and didnt send me into bankruptcy. I will definitely shop here again!!
July 21, 2019
I would recommend this to anyone its perfect fit good quality. Great price
November 10, 2019
Looks Good! Good Quality Parts!
Everything looks like good quality parts. I installed them myself and they went on without a hitch. Well see how they hold up. Thanks!
March 31, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford Taurus Mercury Sable Inner & Outer 4 Piece Tie Rod Set-1ASFK02212 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.