Replaces

Ford Taurus Mercury Sable Fuel Tank Filler Neck - 1AFMX00020

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Direct replacement
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident
  • Fits SEDAN MODELS WITHOUT the On board Vapor Recovery System (OVRS)

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Fuel Filler Neck at the Fuel Door (1:05)
    • Open the fuel door
    • Take off the fuel cap
    • Remove the three 10mm bolts from the fuel filler neck
    • If the bolts will not come off leave them to be tightened into the new neck later
  2. step : Removing the Filler Neck (1:55)
    • Loosen the 8mm bolt from the larger fill tube clamp
    • Loosen the 8mm bolt from the smaller fill tube clamp
    • Pry the smaller rubber hose off the filler neck with a flat blade screwdriver
    • Remove the 10mm bolt that holds the filler neck to the vehicle body
    • Spray penetrating oil between the filler neck and the larger hose
    • Separate the filler neck from the rubber hose
    • Pull the filler neck off
  3. step : Connecting the New Filler Neck (4:20)
    • Feed the new filler neck into position.
    • Push the hoses on to the new filler neck
  4. step : Mounting the New Filler Neck (4:59)
    • Holding the filler neck in place, tighten the top two 10mm bolts into the new filler neck
    • Put the fuel cap lanyard under the third bolt
    • Insert the third 10mm bolt
    • Twist on the fuel cap
    • Close the fuel door
    • Insert the 10mm bolt that holds the filler neck bracket to the body
    • Slide the hose clamps into position
    • Tighten the hose clamps using an 8mm socket

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Fit well, quick delivery
Mine was badly rusted, the vent tube was rusted away. Found it difficult to position while trying to screw in the 3 screws behind the filler door, a 2nd set of hands would have helped. Wish they would supply new self tapping screws, the old ones were rusty and didnt seem to want to "bite" and self tap in.
October 14, 2017
Taurus Filler Tube
This item came quick, priced low and worked just fine.
February 22, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2007Ford Taurus Ford Taurus Sedan Fuel Tank Filler Neck for Models without Onboard Vapor Recovery System (excluding Flex Fuel)
1998-2005Mercury Sable Mercury Sable Sedan Fuel Tank Filler Neck for Models without Onboard Vapor Recovery System (excluding Flex Fuel)
Only 2 left in stock
Part #: 1AFMX00020


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:09 min)