Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • LH (Driver Side)
  • Replaces dealer part numbers: 1F1Z-13008-AB, 1F1Z13008AB
  • Inside base is chrome (NOT 100th Edition Centennial Model)
  • Includes lens & housing
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Remove the headlight assembly. (0:55)
    • Loosen up the 8 mm bolt securing the headlight.
    • Remove the retaining clips.
    • Pull the headlight assembly out.
    • Disconnect the harness.
  2. step : Install the new headlight assembly (2:03)
    • Remove the retaining ring and turn counter clock wise to remove the bulbs from the headlights.
    • Install the bulbs into the headlight assembly by turning them clockwise.
    • Plug in the harness to the headlight assembly.
    • Slide the headlight assembly into place, starting with the fender/inner side first.
    • Tighten the 8 mm bolt and push in the retaining clips.
    • Snug the 8 mm bolt down and remove the protective plastic from the new headlight.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Perfect
Ordering process was quick. Shipping was on time. New headlights fit great! 2003 Ford Taurus. Could barely see five feet with the old headlights. This was so much easier, and effective, than trying to clean the old ones. I did need to adjust them quite a bit as they pointed almost straight down, but thats an easy fix.
January 23, 2017
The part fit on the car but I had used a diffent bulb that the original
I needed to modify the bulb connector to allow it to fit. Looks great and worked fine after some mods on the bulb connector.
January 23, 2017
New headlight replacement
I had to order a headlight assembly after a deer hit my car. The part from A1 auto was a lot cheaper than local part store. Went right in and had not trouble installing it
April 28, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2002Ford Taurus Ford Taurus Headlight Driver Side
2003Ford Taurus Ford Taurus (excluding Centennial Edition) Headlight Driver Side
2004-2007Ford Taurus Ford Taurus Headlight Driver Side
Part #: 1ALHL00398


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:55 min)