This replacement tail light is just what you need to get your Ford truck in good looking form again!

This Ford tail light features the following specifications:

  • LH (driver's side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Ford truck tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the tail light assembly (0:44)
    • Remove the two inside Phillips screws.
    • Unscrew the two outer Phillips screws.
    • Unplug the wiring harness and either change the bulbs or take the bulbs out and put them in the new tail light assembly.
  2. step : Install the new light or serviced tail light assembly (3:25)
    • Plug in the bulbs and wiring harness.
    • Slide the tail light assembly into place.
    • Screw in the two outer Phillips screws.
    • Use your Phillips screwdriver to screw in the inner screws.
    • Go back and snug down all four screws evenly.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Perfect fit,
Arrived quickly, competitive pricing, and a perfect fit.
May 29, 2018
Purchased
1 month ago
1997 Ford F250 HD Tail Light
This product fit needing just a minor tweak to align one hole screw. Finished in five minutes. Shipping to Vermont only took two days.

1A Auto has been reliable when supplying parts for my truck.
March 9, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1990 Ford Bronco (Built After 10/89 Production Date) Tail Light Driver Side
  • 1991-1996 Ford Bronco Tail Light Driver Side
  • 1990 Ford F150 Truck Styleside Bed (Built After 10/89 Production Date) Tail Light Driver Side
  • 1991-1996 Ford F150 Truck Styleside Bed Tail Light Driver Side
  • 1990 Ford F250 Truck Styleside Bed (Built After 10/89 Production Date) Tail Light Driver Side
  • 1991-1996 Ford F250 Truck Styleside Bed Tail Light Driver Side
  • 1997 Ford F250 Truck Styleside Bed Tail Light Driver Side
  • 1990 Ford F350 Truck Styleside Bed (Built After 10/89 Production Date) Tail Light Driver Side
  • 1991-1997 Ford F350 Truck Styleside Bed Tail Light Driver Side
  • 1990 Ford F450 Truck Styleside Bed (Built After 10/89 Production Date) Tail Light Driver Side
  • 1991-1997 Ford F450 Truck Styleside Bed Tail Light Driver Side

This part replaces:

  • Partslink FO2800106
  • Hollander 166-1673BL
  • OE # E9TZ 13405 C
  • TYC 11-1886-01
  • DEPO 331-1916L-UF
Part #: 1ALTL00088


How-to Video:

(05:21 min)