This replacement tail light is just what you need to get your Ford pickup truck in good looking form again!

This Ford tail light features the following specifications:

  • LH (Driver Side)
  • Replaces dealer part numbers: F85Z-13405-CA, F85Z13405CA
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Does not fit flareside or cab & chassis models

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Ford pickup truck tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:29)
    • Remove the two 8mm bolts on the side of the taillight.
    • Pull the taillight down and out.
    • Twist the sockets out.
  2. step : Replacing the Bulbs (1:00)
    • Pull the bulb out.
    • Push the new bulb into place.
  3. step : Replacing the Taillight Assembly (1:08)
    • Twist the sockets into the new taillight assembly.
    • Line up the taillight and push it into place.
    • Replace the two 8mm bolts on the side of the taillight.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Light Assemblies
This is the second time that I've ordered a light assembly from 1A Auto Supply. The first was headlights for a Chevy Impala. The ease in navigating their site and ordering parts is great. Both of these orders have arrived ahead of estimated delivery dates and had no damages to the lights. Their how-to videos are as good or better than most. They really help us old shadetree mechanics who need help with new technologies.
April 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004 Ford F150 Heritage Truck Styleside Bed Tail Light Driver Side
  • 1997-2003 Ford F150 Truck Styleside Bed Tail Light Driver Side
  • 1997-1999 Ford F250 Light Duty Truck Tail Light Driver Side
  • 1999-2007 Ford F250 Super Duty Truck Tail Light Driver Side
  • 1999-2007 Ford F350 Super Duty Truck Tail Light Driver Side
  • 1999-2003 Ford F450 Truck Tail Light Driver Side
  • 1999-2003 Ford F550 Truck Tail Light Driver Side

This part replaces:

  • Partslink FO2800117
  • Hollander 166-1604L
  • OE # F85Z 13405 CA
  • TYC 11-3190-01-1
  • DEPO 331-1926L-UF
Part #: 1ALTL00102

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(02:14 min)