Replaces

Ford Serpentine Belt Tensioner with Pulley - 1AEBT00010

This replacement serpentine belt tensioner is just what you need to get your vehicle in good working order again! If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner. This part commonly wears out between 60,000 and 70,000 Miles. If it fails suddenly it can leave you stranded.

Specifications:

  • Direct replacement
  • Brand new not rebuilt


To ensure fit please match the 8th digit of your VIN number to the VIN code in the title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Serpentine Belt (0:41)
    • Familiarize yourself with the belt routing diagram
    • Attach a 15mm socket and ratchet to the belt tensioner
    • Pull the tensioner counterclockwise to loosen the belt
    • Pull the belt off the idler pulley
    • Pull the belt off and out
  2. step : Removing the Belt Tensioner (2:07)
    • Remove the T50 Torx bolt from the tensioner
    • Pull off the tensioner
  3. step : Installing the New Belt Tensioner (3:11)
    • Put the tensioner into place sliding the tab between the spring and the tensioner body
    • Insert the T50 Torx bolt into the tensioner
  4. step : Installing the New Serpentine Belt (4:59)
    • Loop the belt around the crankshaft pulley
    • Bring it around the air pump
    • Bring it around the power steering pump
    • Bring it around the A/C pulley
    • Bring it around the alternator pulley
    • Bring it around the tensioner pulley
    • Attach a 15mm socket and ratchet to the belt tensioner
    • Pull the tensioner counterclockwise to loosen the belt
    • Pull the belt on to the idler pulley
    • Check that the belt is routed correctly

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket

1.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
0
0
1
Terrible quality
Bolt bent during install. Very poor quality, had to buy another and new belt locally. Not pleased with quality of either
November 12, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1996 Ford Bronco Serpentine Belt Tensioner with Pulley V8 5.0L
  • 1993-1996 Ford Bronco Serpentine Belt Tensioner with Pulley V8 5.8L
  • 1993-1996 Ford E150 Van Serpentine Belt Tensioner with Pulley V8 5.0L
  • 1993-1996 Ford E150 Van Serpentine Belt Tensioner with Pulley V8 5.8L
  • 1993-1996 Ford E250 Van Serpentine Belt Tensioner with Pulley V8 5.8L
  • 1993-1996 Ford E250 Van Serpentine Belt Tensioner with Pulley V8 5.0L
  • 1993-1996 Ford E350 Van Serpentine Belt Tensioner with Pulley V8 5.0L
  • 1993-1996 Ford E350 Van Serpentine Belt Tensioner with Pulley V8 5.8L
  • 1993-1996 Ford F150 Truck Serpentine Belt Tensioner with Pulley V8 5.8L
  • 1993-1996 Ford F150 Truck Serpentine Belt Tensioner with Pulley V8 5.0L
  • 1992-1993 Ford F250 Truck Serpentine Belt Tensioner with Pulley V8 7.3L Diesel
  • 1993-1996 Ford F250 Truck Serpentine Belt Tensioner with Pulley V8 5.8L
  • 1993-1996 Ford F250 Truck Serpentine Belt Tensioner with Pulley V8 5.0L
  • 1992-1993 Ford F350 Truck Serpentine Belt Tensioner with Pulley V8 7.3L Diesel
  • 1993-1997 Ford F350 Truck Serpentine Belt Tensioner with Pulley V8 5.8L
  • 1992-1993 Ford F450 Truck Serpentine Belt Tensioner with Pulley V8 7.3L Diesel

This part replaces:

  • OE # F5TZ 6B209 D
  • OE # F2TZ 6B209 D
  • Dorman 419-203
Part #: 1AEBT00010

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:03 min)