Replaces

Ford Ranger Mazda B2300 Truck Brake Kit Front Nakamoto CD833, 54029-DSZ - 1APBS00694

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a matched Pair
  • Includes LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacement
  • Front 11.28 inch diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Zinc Coated

Zinc Coated to help reduce rust and corrosion for a longer-lasting and better looking rotor

"True" Non-Interference Vane Design

"True" Non-Interference Vane Design retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots are machined to remove brake dust and expel gasses during hard braking

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Quality affordable parts
I was able to install these as a direct replacement onto a 2011 2wd Ford Ranger. The only complaint I have about them is that, I was unaware that they did not come with new wheel bearings. They do come with new installed wheel bearing races.
April 16, 2018
Purchased
4 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2011 Ford Ranger 2 Wheel Drive Front Premium Posi Ceramic Brake Kit Cross Drilled & Slotted Zinc Coated for Models with Rear Wheel ABS Brakes & Front Torsion Bar Suspension Performance Nakamoto
  • 2003-2009 Mazda B2300 Truck 2 Wheel Drive Front Premium Posi Ceramic Brake Kit Cross Drilled & Slotted Zinc Coated for Models with Rear Wheel ABS Brakes & Front Torsion Bar Suspension Performance Nakamoto

This part replaces:

  • Nakamoto CD833, 54029-DSZ
Part #: 1APBS00694


Nakamoto
Brand #: CD833, 54029-DSZ