Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement parking light trims are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Mount in the corners of the fenders
    • also known as side grille moldings
  • Replaces dealer part numbers: F37Z-16160-A, F37Z-16161-A, F57Z-16160-CB, F57Z-16161-CB, F37Z16160A, F37Z16161A, F57Z16160CB, F57Z16161CB
  • Chrome Finish
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
NOTE: For 1993-94 Models: These trim pieces fit 2WD (Two Wheel Drive) XLT models only. They do NOT fit 4WD (Four Wheel Drive), XL, or STX Models.

These parking light trims make great replacements and offer good cost savings over the dealer units.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Grille (0:40)
    • Remove the six Phillips screws on the grille
    • Pull the grille up and out
  2. step : Removing the Parking Light (1:35)
    • Remove the 11mm nut from the parking light
    • Pull out the parking light
    • Disconnect the wiring harness
  3. step : Servicing the Bulb (2:20)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  4. step : Removing the Headlight Trim (2:28)
    • Remove the 11mm bolt on top of the trim
    • Remove the two Phillips screws on the side of the trim
    • Remove the trim
  5. step : Installing the Headlight Trim (3:26)
    • Insert the trim into place
    • Tighten the two Phillips screws to the side of the trim
  6. step : Installing the Parking Light (4:42)
    • Connect the wiring harness
    • Line up the studs on the parking light with the holes on the vehicle
    • Tighten the 10mm bolt to the parking light
  7. step : Reinstalling the Grille (5:41)
    • Insert the grille into place
    • Tighten the 11mm bolt to the top of the trim
    • Tighten the six Phillips screws to the grille

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 11mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1993-1994Ford Ranger Ford Ranger XLT 2 Wheel Drive Chrome Headlight Trim Molding Pair
1995-1997Ford Ranger Ford Ranger Headlight Trim Molding Pair
Part #: 1ALPP00465


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:49 min)