Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Fits RH (Passenger Side)
  • Replaces dealer part number: 4L5Z-15200-BA, 4L5Z15200BA
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement light for factory installed lighting
  • Built to strict quality control standards
  • Not correct for 2005 models with STX package

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Fit guaranteed

  • This fog lamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • If this fog light should fail to provide satisfactory performance you may exchange it.
  • 1A Auto fog lights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged fog lamp with a fog light from 1A Auto can help increase your resale value.
Safety
  • A new driving light can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched driving light.
    • 1A Auto fog lights can help you see farther at night and in poor driving conditions.
    • A new fog light from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Fog Light (0:51)
    • Remove the 8mm bolt from the fog light
    • Pull the locking washers off with needle nose pliers
    • Remove the two 11mm speed nuts from the fog light
    • Twist the bulb out of the fog light, avoiding touching the bulb
    • Pull the fog light out of the bumper from the back side
  2. step : Installing the New Fog Light (3:04)
    • Put the new fog light into place, hanging it on the studs
    • Tighten the speed nuts onto the fog light
    • Twist the bulb into the fog light
    • Insert the 8mm bolt into the fog light
    • Set the adjusting screw to the same length as on the old fog light

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket
  • 11mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004Ford Ranger Ford Ranger Fog / Driving Light Passenger Side
2005Ford Ranger Ford Ranger (excluding STX Models) Fog / Driving Light Passenger Side
Part #: 1ALFL00400


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:15 min)