Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 4L5Z15200BA, 4L5Z15200BB, 4L5Z15200BA, 4L5Z15200BB
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement lights for factory installed lighting
  • Built to strict quality control standards
  • Not correct for 2005 models with STX package

Fit guaranteed

  • These fog lamps will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • If these fog lights should fail to provide satisfactory performance you may exchange them.
  • 1A Auto fog lights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged fog lamp with a fog light from 1A Auto can help increase your resale value.
Safety
  • A new driving light can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched driving light.
    • 1A Auto fog lights can help you see farther at night and in poor driving conditions.
    • A set of new fog lights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Fog Light (0:51)
    • Remove the 8mm bolt from the fog light
    • Pull the locking washers off with needle nose pliers
    • Remove the two 11mm speed nuts from the fog light
    • Twist the bulb out of the fog light, avoiding touching the bulb
    • Pull the fog light out of the bumper from the back side
  2. step : Installing the New Fog Light (3:04)
    • Put the new fog light into place, hanging it on the studs
    • Tighten the speed nuts onto the fog light
    • Twist the bulb into the fog light
    • Insert the 8mm bolt into the fog light
    • Set the adjusting screw to the same length as on the old fog light

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket
  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:15 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket
  • 11mm Socket



This part replaces:

  • OE # 4L5Z15200BA
  • OE # 4L5Z15200BB
  • Partslink FO2593214, FO2592216

Vehicle Fit

  • 2004 Ford Ranger Fog / Driving Light Pair
  • 2005 Ford Ranger excluding STX Models Fog / Driving Light Pair
Part #: 1ALFP00165

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More