This replacement Ford Truck parking light is just what you need to get your truck in good looking form again!


  • RH (passenger's side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts below the headlight
  • Does not include bulbs or wiring

This Ford Truck parking lamp is a great replacement and has good cost savings over a corner light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Servicing the Bulbs (0:37)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  2. step : Removing the Light Assembly (1:50)
    • Remove the two 10mm nuts from the assembly
    • Remove the two Phillips screws from the top of the light
    • Pull the light assembly forward
    • Disconnect the two sockets from the lights
  3. step : Removing the Parking Light (3:54)
    • Remove the 11mm bolt from the marker light brace
    • Remove the three Phillips screws from the parking light
  4. step : Installing the New Parking Light (4:34)
    • Insert the parking light into place
    • Tighten the three Phillips screws to the light
    • Tighten the 11mm bolt to the marker light brace
  5. step : Installing the Light Assembly (5:54)
    • Connect the two sockets to the lights
    • Insert the assembly into place
    • Tighten the two Phillips screws to the top of the light
    • Remove the two 10mm nuts from the assembly

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-1996Ford Bronco Ford Bronco Parking Light Passenger Side
1992-1996Ford F150 Truck Ford F150 Truck Parking Light Passenger Side
1992-1996Ford F250 Truck Ford F250 Truck Parking Light Passenger Side
1997Ford F250 Truck Ford F250 Truck Parking Light Passenger Side
1992-1997Ford F350 Truck Ford F350 Truck Parking Light Passenger Side
1992-1997Ford F450 Truck Ford F450 Truck Parking Light Passenger Side

This part replaces:

  • Partslink FO2521114
  • Hollander 116-858R
  • TYC 12-1469-01
  • DEPO 331-1612R-US
  • OE # F5TZ 13200 AB
Part #: 1ALPK00065

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:42 min)