This Oxygen O2 Sensor is a new, aftermarket replacement part that has the following specifications:

  • Three wire O2 sensor
  • Direct Fit
    -Correct wire length (11.8 Inches)
    -Correct Connector
    -No cutting or splicing
  • Stainless steel used for alloy components
  • Built and tested to strict quality control standards


A direct replacement. If you have a bad O2 sensor causing your vehicle to idle poorly or fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:08 min)

Tools List:

    1A - No Tools Needed

  • No Tools Needed



This part replaces:

  • OE # ZZM018861
  • Standard Motor Products SG23

Vehicle Fit

  • 1987-1989 Ford Bronco Upstream O2 Oxygen Sensor L6 4.9L
  • 1988-1989 Ford Bronco II Upstream O2 Oxygen Sensor
  • 1987-1991 Ford Crown Victoria Upstream O2 Oxygen Sensor V8 5.0L
  • 1987-1989 Ford F150 Truck O2 Oxygen Sensor L6 4.9L
  • 1990 Ford F150 Truck O2 Oxygen Sensor V8 5.0L
  • 1987-1989 Ford F250 Truck O2 Oxygen Sensor L6 4.9L
  • 1990 Ford F250 Truck O2 Oxygen Sensor V8 5.0L
  • 1990 Ford F350 Truck O2 Oxygen Sensor V8 5.0L
  • 1987-1993 Ford Mustang Upstream O2 Oxygen Sensor V8 5.0L
  • 1987-1989 Ford Mustang Upstream O2 Oxygen Sensor L4 2.3L
  • 1987-1990 Ford Taurus Upstream O2 Oxygen Sensor V6 3.0L
  • 1988-1990 Ford Taurus Upstream O2 Oxygen Sensor V6 3.8L
  • 1989-1990 Ford Taurus O2 Oxygen Sensor L4 2.5L Upstream
  • 1989-1995 Ford Taurus Upstream SHO O2 Oxygen Sensor V6 3.0L
Part #: 1AEOS01002

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More