This replacement Tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Replaces dealer part number: 3R3Z-13404-AA, 3R3Z13404AA
  • All red lens with backup lamp in lower inside section
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Direct replacement
  • Built to strict quality control standards

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight (0:29)
    • Twist the plug off.
    • Pull the upper plug off.
    • Pull the insulation panel back.
    • Disconnect the taillight harness.
    • Remove the 11mm nuts securing the light.
    • Push the harness plug through and pull the light out and off.
  2. step : Removing Sockets / Changing a Bulb (2:18)
    • Twist the sockets counter clockwise to remove.
    • To replace a bulb just pull it straight out. Push the new bulb into place.
    • Twist out all of the sockets and remove the retainer clips.
  3. step : Replacing the Taillight (3:00)
    • Remove the shipping covers from your new taillight assembly.
    • Push the retainers into place.
    • Twist in all of the sockets clockwise to lock.
    • Push your harness through.
    • Line up the taillight and press it into place.
    • Replace the 11mm nuts.
    • Pull the plug through and reconnect the harness.
    • Replace the insulation.
    • Replace the two plugs.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 11mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2001 Ford Mustang (excluding Cobra) Tail Light Passenger Side
  • 2002-2004 Ford Mustang Tail Light Passenger Side

This part replaces:

  • Partslink FO2819109
  • Hollander 166-1771R
  • OE # 3R3Z 13404 AA
  • TYC 11-5367-01
  • DEPO 331-1958R-UF
Part #: 1ALTL00115

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:38 min)