These replacement Tail lights are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part number: 3R3Z-13404-AA, 3R3Z-13405-AA, 3R3Z13404AA, 3R3Z13405AA
  • All red lenses with backup lamps in lower inside sections
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Direct replacements
  • Built to strict quality control standards

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Taillight (0:29)
    • Twist the plug off.
    • Pull the upper plug off.
    • Pull the insulation panel back.
    • Disconnect the taillight harness.
    • Remove the 11mm nuts securing the light.
    • Push the harness plug through and pull the light out and off.
  2. step : Removing Sockets / Changing a Bulb (2:18)
    • Twist the sockets counter clockwise to remove.
    • To replace a bulb just pull it straight out. Push the new bulb into place.
    • Twist out all of the sockets and remove the retainer clips.
  3. step : Replacing the Taillight (3:00)
    • Remove the shipping covers from your new taillight assembly.
    • Push the retainers into place.
    • Twist in all of the sockets clockwise to lock.
    • Push your harness through.
    • Line up the taillight and press it into place.
    • Replace the 11mm nuts.
    • Pull the plug through and reconnect the harness.
    • Replace the insulation.
    • Replace the two plugs.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 11mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2001 Ford Mustang Tail Light Pair excluding Cobra Model
  • 2002-2004 Ford Mustang Tail Light Pair

This part replaces:

  • OE # 3R3Z 13404 AA
  • OE # 3R3Z 13405 AA
  • Partslink FO2819109, FO2818109
Part #: 1ALTP00082



How-to Video:

(05:38 min)