Replaces

Ford Mustang Strut & Spring Assembly Front Pair TRQ SCA56952 - 1ASFK00754

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (2:20)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (3:50)
    • Remove the bolt(s) from the bottom of the strut
    • Disconnect any sensors or hoses
    • Turn the wheel
    • Remove any nuts from the sway bar link attached to the strut
    • Removing the nuts on top of the strut
  3. step : Reinstalling the Strut (7:08)
    • Insert the strut into place
    • Insert the nuts to the strut to hold it in place
    • Knock the bottom of the control arm to knock it into the strut or work the strut into place
    • Tighten the two lower bolts to the strut
    • Torque the bottom strut bolts
    • Reinstall the sway bar link
    • Reinstall any harnesses or hoses attached to the strut
  4. step : Reattaching the Wheel (9:03)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Assistant
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

3.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
1
Not so impressive
The ride is definitely smoother but my old struts were obviously shot. These struts are incredibly noisey and I'll probably end up returning them
August 12, 2018
Purchased
3 weeks ago
Response from 1A Auto
Thank you for leaving a product review for the struts you ordered! Our customer service department is here to help, so if you are unsatisfied with your purchase please contact us right away! Our contact info can be found on our website!
August 13, 2018
Tim K
Good
Every thing was great thanks for the good service will use againWrite
July 16, 2018
Purchased
1 month ago
Struts for 07 Mustang gt
Ordered a pair of struts (complete ) got here fast. Quality looking product easy installation did myself with just a few tools . Car rides great nice firm and yet smooth ride. Only have around 100 miles so far. So far so good
January 31, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Looking for a strut for a 2005 mustang lowered 2".?
Tim B on Sep 24, 2016
BEST ANSWER: The customer wanted to raise his car back to stock height and those worked great customer said they ride well

Vehicle Fit

  • 2005-2006 Ford Mustang Front Strut & Spring Assembly Pair TRQ SCA56952
  • 2007-2010 Ford Mustang (excluding Shelby Models) Front Strut & Spring Assembly Pair TRQ SCA56952

This part replaces:

  • Monroe 172138
  • KYB SR4167
  • TRQ SCA56952
Part #: 1ASFK00754


Order must be placed by 4pm ET
TRQ
Brand #: SCA56952

How-to Video:

(09:51 min)