Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Handle is the original color shade.
Pro Tip: Replace Handles in pairs or sets. Fading from the sun or age can make your Vehicle Handles and Bezels appear a hue difference next to new Handles.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an interior door handle on this 2004 Ford Crown Victoria. We show you on the passenger side, but the driver side is a similar procedure. The items you'll need for this include a new interior door handle from 1AAuto.com, flat blade screwdriver, 7mm socket and ratchet, and a T30 Torx Bit.
Using a flat blade screwdriver, pry up the switch panel, and then pull directly out. Then, push the tab on this harnesses and disconnect both of them. Pry out this panel behind the door handle and then remove the T30 bolt. We'll just fast-forward as Don does this.
Now, lining the outside of the door panel, there's three 7mm bolts. Just go ahead and remove each of those. Pry off this triangular panel and then remove the 7mm bolt in here. Now, you can lift the door panel up and off. Now, on the back of your door handle, just push in these four clips and pull the door handle out. Push your door handle back into place.
Now, replace your door panel. Put those lower hooks into place, and then push your harnesses up to that switch panel hole, line up those other hooks, and push the door panel back and down over that lock rod. Down into the window sill.
We're just going to fast-forward here as Don replaces the three 7mm bolts along the outside, the 7mm bolt inside the door panel and that T30 bolt. Replace that triangular panel. Replace that panel behind the door handle then reconnect your harnesses. Put the back end of the switch panel in first then push down the front. We're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
