Replaces

Ford Mercury Cruise Control Switch Motorcraft SW5928 - MCZCC00002

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

MOTORCRAFT CRUISE CONTROL SWITCH ASSEMBLY: SW5928

This Cruise Control Switch Assembly is a Ford / Motorcraft replacement part! It's the same part you would receive if purchased from your local Ford dealer!

Specifications:

  • Brand new Ford / Motorcraft switch
  • Replaces dealer part numbers: F87Z 9C888 BB, F87Z9C888BB, SW5928
  • Steering wheel mounted
  • Direct replacement
  • Number of switches: 5
  • Color: Black
  • Correct for models with Green back light switch buttons

This Cruise Control Switch Assembly is a great replacement and has good cost savings over the dealer part!

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Disconnecting the Battery (1:02)
    • Remove the negative battery terminal with an 8mm socket and ratchet
  2. step : Removing the Steering Wheel (1:50)
    • Pry off the trim buttons on the steering wheel
    • Remove the two 8mm bolts
    • Touch metal components
    • Remove the air bag
    • Disconnect the electrical connector from the bag
    • Remove the T50 Torx bolt in the center of the steering wheel
    • Disconnect the cable
    • Work the wheel off
  3. step : Removing the Cruise Control Switches (3:17)
    • Remove the four Phillips head screws from the switches
    • Remove the two Phillips head screws on the back cover
    • Remove the cable switches from the retainer
    • Remove the two spade connectors at the top
  4. step : Installing the Cruise Control Switches (5:07)
    • Insert the connector into place through the wheel
    • Tighten the four Phillips head screws
    • Plug in the switches
    • Insert the back cover into place
    • Tighten the two Phillips head screws
  5. step : Installing the Steering Wheel (6:28)
    • Insert the steering wheel into place
    • Connect the cable
    • Tighten the T50 Torx bolt to the center of the wheel
    • Torque the T50 Torx bolt to 30 foot-pounds
    • Connect the air bag connector
    • Insert the air bag into place
    • Tighten the two 8mm bolts to the wheel
    • Press on the trim buttons
    • Turn the key to the on position
  6. step : Reconnecting the Battery (8:18)
    • Reconnect the negative battery terminal
    • Tighten the terminal with an 8mm socket and ratchet
    • Check the airbag for deployment

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Star Drivers & Sockets

  • T50 Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Ranger cruise control switch
Watched the instructional video a couple times then went ahead and did the job. My old steering wheel puller wouldn’t fit so had to get a gear puller. I took photos of the wiring arrangement before removing the old switch. Put it back together following the video instructions and all went well. My concern was working around the air bag. It looks like new with the new switches and works just the way it is supposed to. Thanks 1a auto for quality OEM parts and support.
December 10, 2018
Fit perfectly, easy to install.
The old cruise switches on my Ranger had deteriorated and cracked letting the back light shine through, very distracting at night. The new switches came quickly, installed easily, and make the steering wheel look good again.
August 27, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do you sell the switch covers ?separate for these ??
Miguel V September 3, 2015
how do you remove the cruise control switch ?
Binor B May 5, 2016
Remove the cover on steer wheel. Screws on back of steer wheel.
Gerald H May 5, 2016
First thing disconnect the battery. Operate key. Let sit for a few minutes. Air bag precaution. 4 screws on the back of steering wheel. I think they are 8 mm. Pretty simple Just unscrew. The buttons and replace them
Rock U May 6, 2016
Video on line will show you. four bolts remove horn cover.
R P May 6, 2016
Year Make Model Description
1998-2002Ford Explorer Ford Explorer Cruise Control Switch
2001-2005Ford Explorer Sport Trac Ford Explorer Sport Trac Cruise Control Switch
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Lightning Cruise Control Switch
1999-2004Ford F150 Truck Ford F150 Truck Lightning Cruise Control Switch
2001-2003Ford F150 Truck Ford F150 Truck Harley Davidson Edition Cruise Control Switch
1998-2003Ford Ranger Ford Ranger Cruise Control Switch
1998-2001Mercury Mountaineer Mercury Mountaineer Cruise Control Switch
Only 3 left in stock
Part MCZCC00002
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

MOTORCRAFT
Brand #: SW5928