Replaces

Ford Mazda Steering & Suspension Kit 10 Piece Set TRQ PSA58697 - 1ASFK00855

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
    • Put the wheel under the vehicle for added security in the event of a jack failure.
  2. step : Remove the brakes (2:00)
    • Remove the 13 mm sockets anchoring the caliper.
    • Wire tie the caliper up out of the way.
    • Use a 15mm socket to remove the caliper bracket
    • Remove the rotor
    • Remove the dust shield with your 8 mm socket and ratchet
  3. step : Remove the outer tie rod (3:00)
    • Use your pliers to remove the cotter pin from the tie rod
    • Remove the nut with your 21 mm socket and ratchet
    • Pull apart the tie rod with a tie rod puller.
    • Use a paint marker to mark where the top nut on the tie rod is.
    • Use two adjustable wrenches to remove the tie rod.
  4. step : Install the new tie rod (6:15)
    • Apply a little loctite to the inner tie rod
    • Screw on the outer tie rod to the inner tie rod up to your paint marker mark.
    • Fill the dust boot with grease
    • Reassemble the tie rod end, replacing the nut and cotter pin.
    • Reassemble the brakes and wheel.
    • See our other videos for more detailed instructions.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Liquid Thread Locker
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Lug Wrench
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 15mm Socket
  • 21mm Socket

  • Specialty Tools

  • Tie Rod Puller

4.67/ 5.0
9 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
1
1
0
0
Front suspension kit
Great parts for the price. Straight forward replacement and if you need help they have a video available.
January 31, 2017
Awesome
Everything was correct and good quality!! Would reccomend this to anyone great deal saved a lot of money
April 25, 2017
Good fit
Everything seems to be working great. They make the ride smooth again. Only issue is the grease fitting on the bottom ball joint. You cant leave them in bc they hit the axle. Just grease them up, take them out and plug the whole with a flat screw
June 19, 2017
Good kit, fast shipping
Got the kit fast but when I open it not all the ball joints come with grease fittings. I got two different types of upper ball joints. One with the grease fitting, which I like and wanted and the other with out. Then the steering rack putter ball joints didnt have any grease fittings like there picture. I called the customer service and they told be they have both types and it doesnt matter they both work. I dont like to mix up brands and types but I had no choice but to put them on because I had already taken all my parts off and was waiting on ups to brings the new ones that day. Put them on and they seem to be doing good on a 350 mile road trip I took.
September 27, 2017
1a auto is my go to place to order parts
I ordered several times from 1a auto and I’ve not been disappointed yet always helpful and if your not sure about something pick up the phone and a representative will be gladly to help.
September 4, 2018
Awesome!
I was amazed at the delivery time. Must faster than they originally told me. Parts are high quality and everything was correct. I will definitely order from here again and again.
December 20, 2018
Lower front control arm part kit
A1 parts prices are unbelievable. I Have already recommended the company to all my friends
April 12, 2019
Price was affordable
Great Quality parts that are very affordable way better den those auto parts stores I recommend 1aauto delivery was earlier den I expected
September 15, 2019
Great parts!!
Parts were exactly as advertised. Good quality, fitment was perfect.
November 12, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do the ball joints have grease fittings?
James W April 17, 2016
No
Brian F April 18, 2016
Is this kit for torsion bar or coil spring front suspension?
EnginePaul E May 7, 2019
Please review the Vehicle Fit tab on the listing to see which vehicles are specific to suspension type.
Andra M May 7, 2019
Year Make Model Description
1998-2000Ford Ranger Ford Ranger Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
2001-2005Ford Ranger Ford Ranger (excluding Edge Models) Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
2006-2009Ford Ranger Ford Ranger (excluding Sport Model) Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
2010-2011Ford Ranger Ford Ranger Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
2001-2009Mazda B2300 Truck Mazda B2300 Truck Steering & Suspension Kit 10 Piece Set
1998-2001Mazda B2500 Truck Mazda B2500 Truck Rear Wheel Drive with Front Coil Spring Suspension Steering & Suspension Kit 10 Piece Set
1998Mazda B3000 Truck Mazda B3000 Truck Rear Wheel Drive with Front Coil Spring Suspension Steering & Suspension Kit 10 Piece Set
1999-2000Mazda B3000 Truck Mazda B3000 Truck (excluding Troy Lee Models) Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
2001-2007Mazda B3000 Truck Mazda B3000 Truck (excluding Dual Sport Models) Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
1998Mazda B4000 Truck Mazda B4000 Truck Rear Wheel Drive with Front Coil Spring Suspension Steering & Suspension Kit 10 Piece Set
1999-2000Mazda B4000 Truck Mazda B4000 Truck (excluding Troy Lee Models) Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
2001-2003Mazda B4000 Truck Mazda B4000 Truck (excluding Dual Sport Models) Rear Wheel Drive Steering & Suspension Kit 10 Piece Set
Part 1ASFK00855
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA58697