Replaces

Ford Mazda Mercury Steering & Suspension Kit 12 Piece Set - 1ASFK06286

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   12 Piece Set
  • Kit Includes:
      (2) Front Sway Bar Links
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Upper Control Arms with Ball Joints
      (2) Steering Rack & Pinion Bellows
      (2) Front Inner Tie Rods


Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the Wheel (1:59)
    • Pull off the center cap
    • Loosen the lug nuts
    • Remove the cotter pin and loosen the 35mm hub nut
    • Loosen the seven 13mm 12-point bolts that hold the axle to the front drive
    • Raise and secure the car
    • Remove the wheel
  2. step : Loosen the Torsion Bar (2:54)
    • Spray the torsion bar with spray paint and loosen the torsion bar tension bolt with an 18mm bolt
  3. step : Remove the Tie Rod (3:45)
    • Use a pair of pliers to remove the cotter pin
    • Remove the nut at the end of the tie rod
    • Use a tie rod puller to separate the tie rod
  4. step : Remove the stabilizer links (5:25)
    • Use a 9/16 wrench to secure the bottom and a 14 mm socket to unbolt the stabilizer link
    • Use a hammer and punch to remove the stabilizer link
  5. step : Pull the Axle from the CV Joint (6:52)
    • Unbolt the seven bolts, using a pry bar to keep the hub from rotating
    • Remove the hub nut using a 35 mm socket
    • Give the axle a tap with a hammer and pull the axle out
  6. step : Remove the Ball Joint (9:00)
    • Use a jack and wood plank or two to lift the control arm and relieve tension from the ball joint
    • Unbolt the the ball joint using a breaker bar and 27mm socket
    • Use a ball joint removal tool to pull the ball joint apart
    • With a ball joint press, remove the ball joint completely
    • See Part Two for reassembly

Tools needed for replacement:

    General Tools

  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • Ball Joint Press
  • Tie Rod Puller

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Front End Kit
Received the kit in short-order, had mechanic install. About 4 hours. Everything fit perfectly. Also installed shocks. Rides and drives like a new truck. Good product and good service. Bryan L. Ocklawaha, Fla.
September 17, 2018
Parts Review
I received great service. The parts were accurate. The price was lowest. Delivery on time. Thanks for great service
December 30, 2018
Top notch parts
My package came complete we all know how frustrating it can be to be missing one little thing. It also arrived well packaged and was delivered in a timely manner. Ive got 2 Rangers to complete and will be getting all the parts I can from 1A Autoparts.
September 8, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this kit fit a torsion bar front end ?? 1998 ranger 4x4
David Y July 18, 2019
According to the specifications, this kit is listed to fit the following: 1998-11 Ford Ranger 4 Wheel Drive Steering & Suspension Kit 12 Piece Set
Peter M July 18, 2019
Year Make Model Description
1998-2001Ford Explorer Ford Explorer Steering & Suspension Kit 12 Piece Set
1998-2011Ford Ranger Ford Ranger 4 Wheel Drive Steering & Suspension Kit 12 Piece Set
2001-2005Ford Ranger Ford Ranger Edge Rear Wheel Drive Steering & Suspension Kit 12 Piece Set
2006-2009Ford Ranger Ford Ranger Sport Rear Wheel Drive Steering & Suspension Kit 12 Piece Set
1999-2001Mazda B2500 Truck Mazda B2500 Truck Rear Wheel Drive with Front Torsion Bar Suspension Steering & Suspension Kit 12 Piece Set
1998-2007Mazda B3000 Truck Mazda B3000 Truck 4 Wheel Drive Steering & Suspension Kit 12 Piece Set
1999-2000Mazda B3000 Truck Mazda B3000 Truck Troy Lee Rear Wheel Drive Steering & Suspension Kit 12 Piece Set
2001-2007Mazda B3000 Truck Mazda B3000 Truck Dual Sport Rear Wheel Drive Steering & Suspension Kit 12 Piece Set
1998-2009Mazda B4000 Truck Mazda B4000 Truck 4 Wheel Drive Steering & Suspension Kit 12 Piece Set
1999-2000Mazda B4000 Truck Mazda B4000 Truck Troy Lee Rear Wheel Drive Steering & Suspension Kit 12 Piece Set
2001-2003Mazda B4000 Truck Mazda B4000 Truck Dual Sport Rear Wheel Drive Steering & Suspension Kit 12 Piece Set
2004-2008Mazda B4000 Truck Mazda B4000 Truck Rear Wheel Drive with Front Torsion Bar Suspension Steering & Suspension Kit 12 Piece Set
1998-2001Mercury Mountaineer Mercury Mountaineer Steering & Suspension Kit 12 Piece Set
Only 3 left in stock
Part 1ASFK06286
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.