Ford Mazda Mercury Heater Blower Motor with Fan Cage - 1AHCX00179

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This Ford Escape, Mazda Tribute, & Mercury Mariner heater blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 2L8H 19805 AA, 2L8H AA, 2L8H19805AA, 2L8HAA, 5L8Z 19805 AA, 5L8Z19805AA, EC076114ZB, EC07-61-14ZB, MM849, MM849, MM896, MM896, MM911, MM911, YL7Z 18504 AA, YL7Z18504AA, YL8H 19805 DA, YL8H DA, YL8H19805DA, YL8HDA, YL8Z 19805 DA, YL8Z19805DA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Blower Motor (0:34)
    • Disconnect the blower motor resistor wiring harness
    • Pull the blower motor wiring harness out of its clip
    • Disconnect the bower motor wiring harness
    • Remove the three 8mm bolts from the blower motor
    • Pull out the blower motor
  2. step : Preparing the New Blower Motor (2:09)
    • Attach the foam pad to the new blower motor with contact cement
    • Attach the gasket to the new blower motor with contact cement
    • Put the plastic cover onto the new blower motor
  3. step : Installing the New Blower Motor (2:34)
    • Twist the new blower motor into place
    • Insert the two inside 8mm bolts into the blower motor
    • Insert the outside 8mm bolt into the blower motor
    • Reconnect the blower motor wiring harness
    • Clip the blower motor wiring harness into place
    • Connect the blower motor resistor wiring harness

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Works great!
My old blower fan (factory) split down the middle. Got this as a replacement and was not disappointed. This model has a metal washer bit you can see in the picture to help prevent the exact type of split that my factory blower developed. Works great and is maybe 5% quieter than my old blower.
January 29, 2017
Blower motor
100% Would recommend this part. Works like it should and Fast shipping
March 7, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do it comes with the foam and rubber seal?
Johnny T April 16, 2019
It does not include foam or the rubber seal. This item will come exactly as pictured in the listing.
Andra M April 16, 2019
Year Make Model Description
2001-2007Ford Escape Ford Escape Heater Blower Motor with Fan Cage
2001-2006Mazda Tribute Mazda Tribute Heater Blower Motor with Fan Cage
2005-2007Mercury Mariner Mercury Mariner Heater Blower Motor with Fan Cage
Only 3 left in stock
Part 1AHCX00179
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.