Replaces

Ford Locking Hub Pair Front Ford OEM BC3Z3B396B - MCSHS00023

Specifications

  • Brand New Ford Hubs
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Original equipment part
  • Fit 4WD (Four Wheel Drive) Models with Manual Locking Hubs only

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Hub (0:46)
    • Remove the center cap using a pry bar or screwdriver
    • Remove the snap ring from the hub
    • Pull the hub out
    • If the hub is stuck spray it with penetrating oil and let it sit for a while
    • Hit it with a rubber mallet from the top and bottom until it loosens and pull it free
  2. step : Installing a New Hub (2:27)
    • Clean the inside of the hub with a wire brush
    • If available use compressed air to spray out the debris
    • Push the new hub into place
    • Use a rubber mallet to help the O-ring seat
    • Put the snap ring on
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Rubber Mallet
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Locking Hubs for 4x4
Great people to do business with, Very knowable.right part from the start, fit the truck as expected, will buy from these people again. Thanks Keith
September 20, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:59 min)

Tools List:

    General Tools

  • Rubber Mallet
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver



This part replaces:

  • Ford OEM BC3Z3B396B
  • OE # BC3Z3B396B

Vehicle Fit

  • 2005-2016 Ford F250 Super Duty Truck Front Manual Locking Hub Pair Ford OEM BC3Z3B396B
  • 2005-2017 Ford F350 Super Duty Truck Front Manual Locking Hub Pair Ford OEM BC3Z3B396B
  • 2005-2016 Ford F450 Truck Front Manual Locking Hub Pair Ford OEM BC3Z3B396B
  • 2005-2016 Ford F550 Truck Front Manual Locking Hub Pair Ford OEM BC3Z3B396B
Only 2 left in stock
Part #: MCSHS00023

Ships Same Day for orders placed by 4 P.M. ET

Brand #: BC3Z3B396B

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More