1ASSL00222-Ford Lincoln Mercury Rear Driver or Passenger Side Sway Bar Link

Replaces

Ford Lincoln Mercury Rear Driver or Passenger Side Sway Bar Link TRQ

1ASSL00222

This part replaces:

  • Moog K80033
  • OE # 1L2Z5495BA
  • TRQ PSA67916
FREE SAME DAY SHIPPING
Save 35%
List: $28.95 Save: $10.00
Part 1ASSL00222
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA67916

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) REAR
  • Includes bolt, bushings, and washers
  • Replaces dealer part number: 1L2Z5495BA, 1L2Z 5495 BA
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:38)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:05)
    • Hold the upper stabilizer link stud with a 16mm socket and ratchet
    • Remove the upper nut from the stabilizer link with a 15mm socket and ratchet
    • Hold the lower stabilizer link stud with a 15mm socket and ratchet
    • Remove the lower nut from the stabilizer link 16mm socket and ratchet
    • Pull off the stabilizer link
  3. step : Reinstalling the Stabilizer Link (3:08)
    • Place a washer and a bushing onto the link
    • Push the stabilizer link into place
    • Add a bushing, a washer, a tube, a washer, and a bushing
    • Push the link through the sway bar
    • Add a bushing and a washer
    • Preliminarily tighten the 15mm nut by hand
    • Raise the wheel with a floor jack to simulate riding positions
    • Hold the upper stabilizer link stud with a 16mm socket and ratchet
    • Tighten the upper nut to the stabilizer link with a 15mm socket and ratchet
    • Hold the lower stabilizer link stud with a 15mm socket and ratchet
    • Tighten the lower nut to the stabilizer link 16mm socket and ratchet
  4. step : Reattaching the Wheel (4:14)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 16mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2005Ford Explorer Ford Explorer Rear Driver or Passenger Side Sway Bar Link
2003-2005Lincoln Aviator Lincoln Aviator Rear Driver or Passenger Side Sway Bar Link
2002-2005Mercury Mountaineer Mercury Mountaineer Rear Driver or Passenger Side Sway Bar Link

Part Interchange

Brand Label Part Number
DIY Solutions SUS06792
MOOG K80033
MOOG Chassis Products K80033

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA67916
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Lincoln Mercury Rear Driver or Passenger Side Sway Bar Link TRQ-1ASSL00222 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.