1AHCK00078-Ford Lincoln HVAC Blower Motor Kit


2009 Lincoln Navigator (Built After 3/30/09 Production Date) with Manual Temperature Control Front HVAC Blower Motor Kit

Guaranteed to fit: 2009 Lincoln Navigator

Fit Details

  • Front or Rear Location: Front
  • Vehicle Heating & A/C Option: with Manual Temperature Control
  • Build Date: Built After 3/30/09 Production Date

Part Details

  • Kit Includes: (1) Heater Blower Motor
  • Kit Includes: (1) Heater Blower Motor Resistor

This part replaces:

  • OE # ZZCA61815
  • OE # CL1Z 19805 A
  • Standard Motor Products RU-440
  • TYC 700237
  • Hollander 615-00200
  • OE # 3F2Z18591AA
Part 1AHCK00078

Out of Stock



DIY Solutions
Brand #: HVA01154
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Kit Includes:
      (1) Heater Blower Motor
      (1) Heater Blower Motor Resistor

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Blower Motor (0:42)
    • Use a 7mm socket to remove the three trim bolts from the glove compartment, leaving the glove compartment latched
    • Slide the glove compartment out
    • Use a body clip to remove the two clips holding up the felt panel underneath the glove compartment
    • Disconnect the motor's electrical connector
    • Use either an 8mm socket or a gear ratchet to remove the blower motor mounting bolts
    • Wiggle the blower motor to pull it out
  2. step : Replacing the Blower Motor (4:17)
    • Slide the blower motor into position and line up the mounting bolts
    • Insert the mounting bolts and tighten them with an 8mm socket
    • Reconnect the electrical connector
    • Slip the felt panel's bottom slot over the stud underneath the glove compartment
    • Snap the two felt panel clips into place
    • Line up and insert the glove compartment

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket
  • 7mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is the fan balanced?
J K September 29, 2019
Thank you for your inquiry! Yes the fan cage is balanced.
Tim K September 30, 2019
Is the fan balanced?
J K September 29, 2019
This fan should come as being balanced. Please let us know if you have any further questions.
Emma F September 30, 2019

Fits the following Makes:

Year Make Model Description
2009Ford Expedition Ford Expedition (Built After 3/30/09 Production Date) with Manual Temperature Control Front HVAC Blower Motor Kit
2010-2016Ford Expedition Ford Expedition with Manual Temperature Control Front HVAC Blower Motor Kit
2009-2014Ford F150 Truck Ford F150 Truck with Manual Temperature Control HVAC Blower Motor Kit
2009Lincoln Navigator Lincoln Navigator (Built After 3/30/09 Production Date) with Manual Temperature Control Front HVAC Blower Motor Kit
2010-2016Lincoln Navigator Lincoln Navigator with Manual Temperature Control Front HVAC Blower Motor Kit

Part Interchange

Brand Label Part Number
DIY Solutions HVA01154
DIY Solutions HVA01430
DIY Solutions HVA00978
Ford 3F2Z18591AA
Ford CL1Z 19805 A
Ford ZZCA61815
Hollander 615-00200
Standard Motor Products RU-440

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: HVA01154
Product Reviews
4.75/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Blower Motor F150
The blower motor & resistor fit with no issues in my 2013 F150 and it is as quiet as the original.
February 11, 2020
Rplacement blower for vehicle heater
I am a female. I purchased this part to fix the heater in the truck. It was very easy to take the old one out and to replace the new one. The heater would not heat the vehicle and was making a horrible grinding noise. We figured this might be the problem and it was exactly what was wrong. Heater fixed and we did not have to pay HIGH labor charges to get it fixed. Pays to do things yourself!!
March 5, 2020
Saved $200
Fit perfectly. Saved $200 buying from 1A. Wonderful customer service.
April 30, 2020
First one sent was trash second seems to be good
I received the first blower on time. Installed it buy watching your you tube video , it started smoking and sounded like rocks were in it! I emailed you there and you sent me a new one and I didnt have to ship the first one back. So second time installing it works ??. ALL GOOD THX
June 16, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Lincoln is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Lincoln or Ford Motor Company. See all trademarks.

Ford Lincoln HVAC Blower Motor Kit-1AHCK00078 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2009 Lincoln Navigator with these options.