Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Headlights 1999-2004 Ford F250 Super Duty
How To Replace Headlight 1999-2007 Ford F-250
How To Replace Parking Light 1999-2007 Ford F-250
Created on:
Tools used
Phillips Head Screwdriver
Bent Tipped Awl
Flashlight
1. Changing the Headlight Bulbs
Reach in to the back of the light and twist the ring counter clockwise
Pull it off to pull the bulb out
Hold the collar back and pull the bulb free
Push a new bulb in and snap it back into the ring
Push the bulb back into the assembly and twist clockwise
2. Removing the Headlight Assembly
Use an awl to pull the arms out and up on the side of the tabs holding in the headlight
Hook the awl into the top of the clip and force it up and out. Repeat on the other side of the light
Remove the clip down past the headlight wiring harness. Remove the clip by pressing in the wings on either side
Pull the headlight out
Disconnect the harnesses to free the light
3. Installing the New Headlights
Adjust the lower clip to match the clip on the old headlight
Measure the top adjustors to make sure they are the same distance from the light
Reconnect the light harnesses
Line up the light and push it in to connect it
Push the clips on the back, back into place
4. Adjusting the Headlight
Set the light to your states standards
The right Phillips screw adjusts the light left to right
The left Phillips screw adjusts the light up and down
Brought to 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Hi, I am Mike Green. I am one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I am going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1A Auto. The right parts installed correctly, that is going to save you time and money. Thank you and enjoy the video.
In this video we are going to show you how to replace the headlight on this Ford F-250. The first couple minutes we'll just deal with if you're just replacing the bulb. Then after that we go into how to change the whole headlight assembly. The headlights on these trucks get faded, cloudy, and yellow quite a bit. So they're a pretty popular reinstallation item. The only tools you'll need a bent-tipped awl and a Phillips screwdriver.
Okay. To change your light bulb, you want to come in behind and you can see the back of the light bulb with that ring around it. Reach in, turn that ring counterclockwise. Okay here you can see close-up better angle, this is what you are reaching for. You turn this counter clockwise, pull it off. Then you kind of have to use it to kind of shake your headlight up and down and then bring it out.
Right up here pull the collar back. Just use a screwdriver, kind of force that off. There is your bulb disconnected. Reconnect, just put the bulb in, push the harness together, Then pull that back to just make sure that is connected correctly. When putting the bulb back in you want to look right here you can see there is kind of a slot right on top of the housing. That lines up with the slot on the bulb and push together and lock your ring on.
Okay. To remove all these headlights you're first going to have to pull two tabs up. One here and one here. Okay, so here is the back of the headlight. So the clips go right down on here. So you can see that they hold on a couple different ways. You can see that these arms curl in to lock into these slots. So that's why you put this down in there, lock this in. Then pull on it up to try to get those right out of those slots. Okay, and it's also shaped, it has a little. It's got almost a little ridge right here. That's why you have to kind of pry back and then up and out to get these off.
So now I am going to go back to these clips here. Take my bent tipped awl and put it in, pull out, and up. Then go down to the other side pull out, then twist out, and up. Okay. Now notice I have a glove on. What I am going to do is hook my awl into that slot at top. I'm going to pry this way which forces the clip out away from the truck, and I am going to put my glove on top of the clip as well just to kind of hold it in place. So that when I pull it out it stays on my awl. Do the same thing for this side. Use a flashlight. Pull up on one side. Hook it into the other side. Pull up on that side, put my awl down in there, get your fingernail down in there. Push out and pull up, and there is my other clip out.
Okay the next part of this is a bit difficult to film, but right down in here is the headlight. Down a little further, my hand gets in the way, down a little further you could see another little clip poking through the fender. Okay looking at my new light, it has this right here and it has a couple little wings on it. These squeeze actually pretty easy. So what you want to do is reach down in there, kind of give these and squeeze while you pull out.
Okay so I reach down in. You'll probably squeeze them one at a time. Squeeze the top or the bottom with your fingernail or take a small screwdriver with you. Then it releases and then you can pull the headlight out. Take that off then pull the bulb right out. Then disconnect the harness. Here's the light that was in the truck, new light from 1A Auto. Lights from 1A Auto, they are just like the original. They are going to shine. They're DOT approved. One thing you want to do before you go to put them in, is you see here, this is an adjuster and you can see the length between there and there. On my one - one that was in the truck the length is much shorter here. So I am going to adjust this to match that. I am also going to do the same thing at the top here and with this one here. So I am just going to make the adjusters the new light match the old light. With the one exception being, you can see that the design of this mount is a little different than the original. So that adjuster, I am going to actually measure the distance between the light and the adjuster and make them the same.
Here's my new light. I am going to plug in my bulb and make sure this adjuster goes back into the slot where its supposed to be. See that's going right into that hole and that's going to go right into that hole. Push the bottom in to lock it and the tops are in. Now I am going to put my clip down in carefully. Push back on the light some. Get it started. So this one I am going to use my bent tipped awl just so I don't drop it. Put it down in, get it started, push the light in. Just use my Phillips screwdriver here to try to push these clips all the way down on. Then the lights all set.
Okay to adjust your headlight, this screw here adjusts your light left to right. If you look at the line down here, as I go counter clockwise light goes in, clockwise light goes out. Then the other screw is way down in here, right in here. Counter clockwise light goes down, clockwise light comes up.
We hope this video helps you out. Brought to you by www.1AAuto.com Your source for quality replacement parts and best service on the internet. Please feel free to call us toll free at 888-844-3393. We're the company that is here for you on the internet and in person.
Tools used
Flat Blade Screwdriver
8mm Wrench
Magnet - Extendable
Needle nose pliers
Pick
Tools used
Phillips Head Screwdriver
Pry Bar
Magnet - Extendable
Product Reviews
Loading reviews
4.63/ 5.043
43 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
34
5
2
1
1
Overall pretty good.
Paul
January 21, 2017
Have had them on for a couple weeks. No issues. Has been -20s. So far I like them. For the price point they are good.
Quality products at an affordable price
Gaylon
January 25, 2017
Items delivered promptly. Exactly what I needed...fit and quality. Installation video on YouTube was very helpful and made the job easy...step by step.
Headlights
James O.
March 12, 2017
Everything fit perfectly. The order was shipped when they said it would be. All around good transaction.
I see you now
william
June 19, 2017
install was tricky but product is great for my 2002 f250 sd . I see everything now ! I really do recommend this ! thanks 1aauto
Decent Product
S
August 22, 2017
For the price, I can't really complain. The lights have a high quality appearance. Once installed the fit and finish was not as good as I would have liked. The seam spacings were a little wide and not quite parallel. But, I am not driving a show vehicle and the work as advertised.
The installation video was helpful. Removing the turn signal lights is a little more challenging as the screws are hard to access past the bumper. This wasn't covered in the video.
Drop in replacement.
U
December 21, 2017
No modification necessary for these lights
I did not realize how bad my old lights were until I installed the new ones and drove the next night! I guess I won't need new glasses after all!
Great looking headlights
T
April 22, 2018
I purchased these headlights for my 2001 Ford Excursion because my old lights were fading and turning yellow. These lights really cleaned the whole look of the truck up. I would definitely recommend these, especially for how good the price is!
2002 power stroke.
J
May 10, 2018
If you looking for that new clean look again you wont be disappointed. They are easy to install and better looking than oe. Driving at night is much easier for my dad now he has this setup they even come with new bulbs that a value alone. While you at it order you a chrome grill ties in good.
Head light assembly
Kyle
August 30, 2018
The product as described was great quality and fitted well.Shipping was fast and packaged well would definitely recommend this product to anyone.
New headlights
ADAM
September 6, 2018
It took about 1.5 hours to install all 4 pieces . They look great and I would recommend them to the next person . Great price fast shipping
Thank you
great improvement over fogged lens
Donn
October 22, 2018
I do not work on cars very often but wanted to save a few bucks, so I put the headlights in myself. The hard part was releasing the clips so I recommend getting extra clips just in case you break them. The small angle alw worked well. The bottom attachment was the most challenging reach. I am sure there are people that are more nimble than me.
Lights were perfect fit.
L
December 20, 2018
The lights we ordered were exactly what we wanted. We were extremely pleased with the excellent video instructions provided by the company online for installing the lights. Communications with this company was very professional.
Headlights do t put out the same beam
C
March 8, 2019
Installing was a pain but the biggest problem was the beams are different trying to match up two different rams is impossible.
5 stars
T
August 11, 2019
Shiped and arrived on time.No problems would recommend doing business with 1aauto.com to anyone
99 F250 Headlight Upgrade
V
August 24, 2019
Fast shipping.
Easy installation.
A nice safety upgrade & looks good too!
Easy shopping at A1 Auto.
F350 Headlights
S
September 2, 2019
Good quality....great service......fit great.
C
September 6, 2019
Ordering was easy and came in real fast on all orders I have purchased through this company.
Perfect Fit!
Jed
September 9, 2019
These headlights were a perfect fit. I appreciate the How-to videos that 1A provides as well. They are a little tricky to install, however with a supplement YouTube search, I accomplished the job. Thanks 1A Auto.
C
October 17, 2019
Awesome!! Everybody things I have a new truck when they Approach it with the new headlights look ! Im like no but dont it look it !!
2002 F250 Headlight Replacement
A
December 24, 2019
Fit perfect. Night and day over old fogged lenses. Dont hesitate to buy.
Good fit
D
January 6, 2020
Good fitting product and good transaction,
look great installed too thanks. ??
Another satisfied customer
Jack
January 15, 2020
Shipping was fast, product was perfect and the price was right. I have used these guys several times in the past and they have never disappointed me. Ill be back!
Great purchase
T
January 18, 2020
Love the lights!! Easy to install. Should include clips.
Poor alignment due to poor fit
J
February 14, 2020
Still have not got proper alignment due to poor fitment!
On Time delivery -perfect fit
SUSAN
February 24, 2020
Wow what a difference we can see now. It was a pain in the butt to replace on our Ford F350 . It looks great.
It's OK at best. I guess you get what you pay for
Tal
March 2, 2020
Got the set to replace foggy headlights. Fit was barely ok and quality of side light bulb fitting looked like it was hacked by a 5 y/o with a machete while looking somewhere else.
It's in place now but required adaptations.
The regular beam seems a bit soft and scattered but it's more observable than my older foggy headlights.
Overall, I wish I did more research and pass on this set
Quick & Easy
J
April 17, 2020
Product shipped fast & installation/ fit were simple and straight forward.
Fit and look great
Scott
July 25, 2020
Great replacement headlight kit. Fits without any modifications. Really makes the front of truck look great again.
2002 F250 Headlight replacement
Armando-
September 5, 2020
Quality looks good but having issues removing the clips on the old headlights. Is there a specific tool that can be bought for these clips?
Perfect fit
Isaac
September 13, 2020
The closest I could find to the factory look I wanted. Install went well, video 1a has is spot on. I just wish they came with the light clips that everyone says break when replacing. I only lost one, but it would be one less thing to have to find later.
Ford F250 lighting kit part #1ALHT00151
Philip
December 23, 2020
Received headlights in a timely fashion, good customer service and product looks amazing, just waiting for the time to install them. Look forward to doing business with 1A auto again!
Ted
January 12, 2021
Still in the boxes headlights and mirrors, due to the weather and work haven't been able to get to them to ibstall
Close but not OEM. Good enough for a 20 year old f250 (2003)
Lawrence
November 17, 2021
Fit real good
Looks great,fit great
2371
December 2, 2021
Headlights on my 03 F250 look great now,in the daytime nice and clean,no more squinting at night to see.
Anthony
December 3, 2021
Very good for oem, easy to replace, I put led lights and can see a lot better at night and it makes my truck look better!
Send new clips
Bobby
January 1, 2022
Wish they had new clips to install old clips got destroyed in the removal
Kurt
March 4, 2022
I bought these to replace some fancy ones I bought on EBAY that never worked like they were advertised to. These were very easy to install. I put the Sylvania Xenon Silverstar bulbs in and they work better than factory. The lights look great too. Thank You..
Paul
April 7, 2022
Direct fit, clear and bright 2000 f250
Dusko
April 16, 2022
Excellent
Fits well enough. Beware, this is a very difficult repair!
[{"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/b7308d5b86d857b355954387bffa84f6_1667855390324_0.jpeg", "caption": "Lower part not really flush, even with adjustments"}, {"url": "https://wac.edgecastcdn.net/001A39/prod/media/pNISJll75W64CYGsite/944856c9d1343062111d62c9280c20cc_1667855390324_1.jpeg", "caption": "Upper part not really flush"}]
Marc
November 7, 2022
Order was shipped quickly and arrived as described in perfect order. Nicely packaged, complete and in excellent new condition.
This fits my truck ok, but not perfectly. It looks acceptable for the price and works well enough.
I will need to trim it a bit more to improve fit.
Unlike shown in the video as easy job, I found the repair to be extremely difficult. Especially on the driver side. The clips and rubber grommets are almost impossible to reach, even with the battery and other parts removed. The video is not showing the details of the repair enough, and close-up is fuzzy and out of focus during the important parts. Perhaps this can be redone with clearer image and better view of how the repair is carried out? I am not a trained mechanic and much less dexterous than experienced car nuts on this site Im sure, so cant blame 1Auto for my lack of experience. But it looked easy enough in the video to try myself. Had I known how difficult it was going to be, Id have hired someone to do t
Shine
Jay
April 2, 2023
Works great
2002 Ford F-350
Matt
March 3, 2024
Fit good and work better than my stock ones
Customer Q&A
What is the brand of this light?February 20, 2018
Brock B
10
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
March 28, 2018
T I
What light bulbs do these take? And do you sell them?November 10, 2019
Grant C
10
Thanks for your inquiry! New light bulbs are not included. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, you'll want to replace them with your original bulbs or with new bulbs. We do not have any further information on bulbs that would be replaced for this assembly. Please let us know if you have any further questions.
November 11, 2019
Emma F
Whats the difference between the composite and the clear lens headlight sets you sell?January 11, 2020
Neil W
10
Thank you for contacting us. The headlights will be a clear lens composite. Just means they are plastic headlights and are not sealed beams. If you have any other questions feel free to contact us at 888-844-3393.
Thank you,
Corey
January 11, 2020
Corey M
Is this for a pair of headlights?May 23, 2020
Kyle S
10
Yes
May 24, 2020
Dave M
10
Yes, this kit will be for a pair of headlights. Please do not hesitate to contact us with any further questions.
May 24, 2020
Emma F
10
I received 2 parking and 2 headlights . Very nice and 1 aauto can't be beat for pricing , customer service and list goes on . I actually had a problem with the one parking light a year into it ,and because of the lifetime warranty 1 aauto sent me out a replacement very promptly.
May 24, 2020
William E
I have a 2004 f250 with sealed beam lights are the composite lights going to fit ?October 26, 2020
Heine B
10
This kit will only be able to fit for vehicles that have composite headlights.
October 27, 2020
Emma F
Does this come with the light bulb retaining rings?November 22, 2022
Scott M
10
No, they do not include retaining rings.
November 23, 2022
Kelly S
10
Mine did not
November 23, 2022
David C
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.