Replaces

Ford Lighting Kit - 1ALHT00148

Click Here to Select Your Vehicle and Verify Fit
00-04 Ford Excursion; 99-04 F250, F350; 99-03 F450, F550 Performance Headlight & Parking Light Kit
Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Kit Includes:
      (2) Diamond Style Parking Lights
      (2) Clear Lens Headlights
  • Product Line:   Performance

Specifications:

  • Comes as a Set of 4
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Includes clear lens composite headlights
  • Includes diamond style parking lights
  • Bulbs not included

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Fit guaranteed

  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.

Quality

  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.

Value

  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.

Safety

  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the Headlight Bulbs (1:05)
    • Reach in to the back of the light and twist the ring counter clockwise
    • Pull it off to pull the bulb out
    • Hold the collar back and pull the bulb free
    • Push a new bulb in and snap it back into the ring
    • Push the bulb back into the assembly and twist clockwise
  2. step : Removing the Headlight Assembly (2:34)
    • Use an awl to pull the arms out and up on the side of the tabs holding in the headlight
    • Hook the awl into the top of the clip and force it up and out. Repeat on the other side of the light
    • Remove the clip down past the headlight wiring harness. Remove the clip by pressing in the wings on either side
    • Pull the headlight out
    • Disconnect the harnesses to free the light
  3. step : Installing the New Headlights (6:24)
    • Adjust the lower clip to match the clip on the old headlight
    • Measure the top adjustors to make sure they are the same distance from the light
    • Reconnect the light harnesses
    • Line up the light and push it in to connect it
    • Push the clips on the back, back into place
  4. step : Adjusting the Headlight (8:43)
    • Set the light to your states standards
    • The right Phillips screw adjusts the light left to right
    • The left Phillips screw adjusts the light up and down

Tools needed for replacement:

    General Tools

  • Flashlight

    • Screwdrivers & Related

  • Phillips Head Screwdriver

    • Specialty Tools

  • Bent Tipped Awl

4.33/ 5.0
9 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
2
2
0
0
superduty upgrade headlight kit
was very fairly priced, and installation was simple, truck looks way better with the clear lenses vs my old fogged lenses
February 18, 2016
Looks good, easy install, feels thin
The lenses look good and were easy to install one I found the installation guide by searching youtube. They feel a bit thin and dont look as well made as the original Ford parts. For the price though, Im happy. Shipping was super fast.
January 27, 2017
Bob
Fast delivery and great service when I called for the kit. Very easy to install and if problems they have a sight to help installing.
March 1, 2017
Fair quality for the price
The housings are sealed water tight and do not leak. The only thing I wish had a little bit more attention would be the turn signal quality control. I had to squeeze the turn signal bulbs in as opposed to them sliding in and locking.
March 8, 2017
Decent quality for the price.
Bought this to update the 80s style lenses that were on my 2k Excursion, and i really like the look. Quality? Like another reviewer said, theyre a little flimsy. I had to replace a marker bulb, and just a little tugging to unseat the tab caused it to snap off. They say theyre warrantied, and i honestly havent contacted them concerning it so i cant say how theyll handle it if i do. I think itll probably be fine without the holding tab, but nevertheless - if you have to replace a bulb in the turn signal part, be really careful...and good luck. Not OEM tough.
March 9, 2017
Perfect fight
Installed these over the weekend and it was as simple as plug n play. Lights line up perfect n are good looking.
September 19, 2017
Not OEM quality
These look great and they fit well. However, the head light refraction is poor. There is an odd star shaped dark spot in the center of the beam that is distracting and annoying. Ive tried original bulbs and Sylvania Ultra with the same result. Would not buy them again.
January 12, 2018
Crystal clear
These kits are great replacement kits. The lenses are crystal clear and fit perfectly. I have bought many sets for different vehicles and they all fit perfect and were of good quality and well made
February 22, 2018
Great Looking Lights
The lights were well packaged and arrived in good condition. The installation was a little harder than the video made it appear, but I was able to get it done without much trouble. I watched a couple of other videos and got a couple of other tips about how to remove the clips that hold the lights in. They fit perfectly. The quality was very good and they look great.
March 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Can you fit an LED bulb in this housing?
Jack D June 25, 2016
These are intended for a standard bulb. We do not have any specs for an LED aftermarket fitment or application.
Brian F June 27, 2016
I dont think so I am using std bulbs
William B June 27, 2016
Year Make Model Description
2000-2004Ford Excursion Ford Excursion Performance Lighting Kit
1999-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck Performance Lighting Kit
1999-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck Performance Lighting Kit
1999-2003Ford F450 Truck Ford F450 Truck Performance Lighting Kit
1999-2003Ford F550 Truck Ford F550 Truck Performance Lighting Kit
1
Part #: 1ALHT00148


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:32 min)