Specifications:

  • One piece design
  • Reinforced aluminum coolant crossover - eliminates failure due to corrosion or vibration
  • Re-engineered reinforced plastic
  • Intake gaskets molded into the intake manifold
  • Fits the following Ford engines as listed per application:
    • V8 5.4L SOHC

Kit includes:

  • Complete improved intake manifold with new aluminum crossover
  • New thermostat, o-ring, and screws
  • Everything needed to do the job right the 1st time

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Great fit
The after market design was a perfect fit, I recommend using it. It took about 2 hours to install with all accessories..
March 6, 2018
Purchased
4 months ago
Works Fine
Even thought it was a little smaller in size than the OEM, the mechanic had no problem installing it. I arrived quickly!
September 26, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 8 answers
Do I remove the old gasket that's stuck on the cylinder head and then just bolt this unit straight on the head?
Robert B on Feb 13, 2018
BEST ANSWER: Thanks for your question! You will want to completely remove and clean the mounting surfaces to allow the new gasket to seal properly. Thank you!
Why is the lower manifold so much smaller then oem version? Will that decrease my trucks performance?
Wfrench314 on Sep 24, 2017
BEST ANSWER: It will not change the performance. It looks smaller because the aftermarket one comes as the full unit and deleted casing that the oem one sat in. Just sets right in, and also deleted the need to have to take out the entire middle to get to it.
Will that fit a 4.6 V8?
R M on May 3, 2018
BEST ANSWER: No this will not fit a 4.6L engine.
USA made?
Frank R on Aug 23, 2017
BEST ANSWER: These are built in either Taiwan or China.

Vehicle Fit

  • 2000-2003 Ford E150 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
  • 2004-2014 Ford E150 Van Upper Intake Manifold (One Piece Design) V8 5.4L
  • 2000-2003 Ford E250 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
  • 2004-2014 Ford E250 Van Upper Intake Manifold (One Piece Design) V8 5.4L
  • 2000-2003 Ford E350 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
  • 2004-2014 Ford E350 Van Upper Intake Manifold (One Piece Design) V8 5.4L
  • 2000-2003 Ford E450 Van Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
  • 2004-2014 Ford E450 Van Upper Intake Manifold (One Piece Design) V8 5.4L
  • 2000-2005 Ford Excursion Upper Intake Manifold (One Piece Design) V8 5.4L
  • 2000-2004 Ford Expedition Upper Intake Manifold (One Piece Design) V8 5.4L
  • 2010 Ford Expedition Upper Intake Manifold (One Piece Design) V8 5.4L
  • 2004 Ford F150 Heritage Truck Upper Intake Manifold (One Piece Design) V8 5.4L SOHC (excluding Lightning Models)
  • 2000-2003 Ford F150 Truck Upper Intake Manifold (One Piece Design) V8 5.4L SOHC (excluding Lightning Models)
  • 2000-2004 Ford F250 Super Duty Truck Upper Intake Manifold (One Piece Design) V8 5.4L SOHC
  • 2000-2004 Ford F350 Super Duty Truck Upper Intake Manifold (One Piece Design) V8 5.4L

This part replaces:

  • Hollander 329-01852
  • OE # 9C2Z9424AA
  • Dorman 615-188
  • Hollander 329-00232
  • OE # 2L1Z9424AA
  • OE # 4C2Z9424CA
  • OE # 5C2Z9424AA
  • OE # AC2Z9424A
Part #: 1AEIM00023